Installation manual

TRINIX — Release Notes 11
New Features
switcher will return to the same condition that it was in when the power
loss occurred; this is due to the memory on the boards. However, this
memory is deleted when a board is removed from the Trinix router. Grass
Valley has determined that it will take approximately three minutes to start
Broadlinx and locate 86 devices; because of this fact, Grass Valley recom
-
mends that one Broadlinx board remains active all the time when using the
Protected Paths feature.
It may take up to four minutes for the Output Signal web page to update
with the current Input number. During this time the routing switcher is
fully functional. The Broadlinx web pages display static information from
the installed hardware and are valid within four minutes of any changes.
Due to the length of the update time, Grass Valley recommends that you
use your control system for monitoring.
Support for the Trinix 128x256 Asymmetric Frame
The new Trinix 128x256 Asymmetric Frame is supported in the latest
version of Broadlinx. This support includes changes to the console com
-
mands and Web pages for the new Asymmetrical frame, including the new
high speed fan and the Output Monitor board (TRX-OPM), see
Figure 3.
Figure 3. Broadlinx Web Page for the Output Monitor Board (TRX-OPM)