Installation manual

TRINIX — Release Notes 19
Software Installation
Figure 10. The Broadlinx: Updating Firmware Status Window - Update Completed
The Broadlinx web page will then indicate “Post Completed.”
5. Navigate to the Firmware Management page. The Restart button will
now appear near the bottom of the page. (The display may vary from
the example that is shown in
Figure 11.)
Figure 11. The Restart Button on the Firmware Management Screen
The cards must be restarted to use the new firmware.
6. Click the Restart button, which is shown above in Figure 11.
The following Caution pop-up window will then appear:
Click this button