Installation manual

16 TRINIX — Release Notes

Version 3.3.0

Figure 5. Battery location on the NR-33000.

2. Insert the Compact Flash card into the slot on the Broadlinx board and

then insert the Broadlinx board into the frame. Broadlinx will then

inventory the boards that are in the frame.

Figure 6. NR-33000 (Broadlinx board) Controls.

Using the Web Page

Navigate to the Broadlinx Firmware Management Web page to update the

firmware.

Note Do not press the Browser's Refresh button (or press F5 on your keyboard)

during the installation. A redrawing issue may occur with the 512x1024

routing switcher's Web page. If you do press the Refresh button, you must

reset the bottom half of the 512x1024 frame.

071828316-BATTERY CONNECTION

Battery terminal location

Reset button

Activate button

and "Active" LED

Flash module

ector button

NR board

left ejector lever

Flash module