Specifications

Using the Setup Wizard

11 Enter the IP address information provided to you by your ISP. Complete all

the required fields, then click

Next. Go to step 14.

12 If you selected PPPoE (Point-to-Point Protocol over Ethernet), the Set PPPoE

screen opens.

Remove any existing PPPoE client software installed on your computers.

13 Type the user name and password provided to you by your ISP, then click

Next.

14 Click Restart, then click Close. You will be returned to the Home tab.

15 Click the close button (the red box with the white X in the upper right

corner of the screen) to exit. Your setup is complete.