Specifications

Using the Setup Wizard

6 Select your time zone from the list, then click Next.

The Setup Wizard tries to auto-detect your Internet connection type. If you

have a Dynamic or PPPoE connection, you will be brought to the

corresponding page. If the wizard is unable to detect your Internet

connection type, the Select Internet Connection Type screen opens.

7 Select your type of Internet connection from the list, then click

Next.

• If you selected Dynamic IP Address (used primarily for cable Internet

service), go to Step 8.

• If you selected Static IP Address, go to Step 10.

• If you selected PPP over Ethernet (used mainly for DSL Internet service),

go to Step 12.

If you are not sure which type of connection you have, contact your ISP.