Specifications

4
Connecting additional computers to the router
Connecting additional computers to the
router
Using additional Ethernet (CAT-5 UTP) cables, connect your Ethernet-equipped
computers to the remaining Ethernet LAN ports on the back of the router.
The front of your router should indicate the following:
• Power LED—a steady light indicates a good connection to the power
supply.
• WAN LED—a steady light indicates a connection on the WAN port. The LED
blinks during data activity.
• LAN LEDs—a steady light indicates a connection to a computer on ports 1
to 4. The LEDs blink during data activity.
WAN LED
LAN LEDs
Power LED