Installation guide

Configuring the router

To review device information:

1 Access the Configuration menu by following the instructions in To access

the Web-based configuration utility: on page 13.

2 Click the

Status tab, then the Device Info button. The Device Information

screen opens.

If your WAN connection is set up for a dynamic IP address, a

Release button

and a

Renew button are available. Click Release to disconnect from your

ISP and click

Renew to reconnect to your ISP.

If your WAN connection is set up for PPPoE, a

Connect button and a

Disconnect button are available. Click Disconnect to drop the PPPoE

connection and click Connect to reestablish the PPPoE connection.

Field Description

Firmware Version The firmware version installed in the router.

LAN IP Address: LAN/private IP address of the router

Subnet Mask: LAN/private subnet mask of the DX-401

WAN IP Address: WAN/public IP address

Subnet Mask: WAN/public subnet mask

Gateway: WAN/public gateway IP address

Domain Name Server: WAN/public DNS IP address

WAN Status: WAN connection status