Installation guide

36
Configuring the router
2 Click the Tools tab, then the System button. The System Settings screen
opens.
3 Enter the following, as appropriate:
U
PGRADING THE FIRMWARE
You can upgrade the firmware of the router.
To make sure the firmware you want to use is on the local hard drive:
•Click Browse to browse your local hard drive and locate the firmware to be
used for the update. Check the Dynex Web site for current firmware
upgrades to download at www.dynexproducts.com.
To upgrade the firmware:
1 Access the Configuration menu by following the instructions in To access
the Web-based configuration utility: on page 13.
Field Description
Save Settings to Local
Hard Drive
Click Save to save a system settings file to your local hard drive.
Load Settings from
Local Hard Drive
Click Browse to find the system settings file saved to your local hard drive, then
click Load to reload the file.
Restore to Factory
Default Settings
Click Restore to restore the factory default system settings to your router.