Installation guide

28
Configuring the router
3 Click URL Blocking, then click Enabled.
4 Enter the following, as appropriate:
C
ONFIGURING MAC FILTERS
Use MAC filters to allow or deny LAN computers access to the network, based on
their MAC addresses. You can either manually add a MAC address or select the
MAC address from the list of clients that are currently connected to the broadband
router.
To configure MAC filtering:
1 Access the Configuration menu by following the instructions in To access
the Web-based configuration utility: on page 13.
2 Click the
Advanced tab, then the Filters button. The Filters screen opens.
3 Click
MAC Filters, then click one of the following:
• Disable MAC filters
• Only allow computers with MAC addresses listed below to access the
network
• Only deny computers with MAC addresses listed below to access the
network
Field Description
Keywords This setting blocks URLs which contain keywords you enter.