Installation guide

Configuring the router
23
2 Click the Advanced tab, then click Virtual Server. The Virtual Server screen
opens.
3 Click
Enabled, then enter the following settings, as appropriate:
Field Description
Name The name referencing the virtual service.
Private IP The IP address of the server computer in the LAN (Local Area Network) that will
be providing the virtual services.
Protocol Type The protocol used for the virtual service.
Private Port The port number of the service used by the private IP computer.
Public Port The port number on the WAN (Wide Area Network) side that will be used to
access the virtual service.
Schedule The times when the virtual service will be enabled. The schedule may be set to
Always, which will allow the particular service to always be enabled. If it is set
to
Time, select the time frame for the service to be enabled. If the system time is
outside of the scheduled time, the service will be disabled.