Installation guide

18
Configuring the router
CONFIGURING PPTP
PPTP, or Point-to-Point Tunneling Protocol, is a WAN connection type used in
Europe.
To configure PPTP:
1 Access the Configuration menu by following the instructions in To access
the Web-based configuration utility: on page 13.
2 Click the
WAN button. The WAN Settings screen opens.
IP Address The static IP Address for the PPPoE connection. This option is only available for
Static PPPoE.
Primary DNS Address The primary DNS IP address provided by our ISP.
Secondary DNS
Address
The static IP Address for the PPPoE connection. This option is only available for
Static PPPoE.
MTU Maximum Transmission Unit-1492 is the default setting. You may need to change
the MTU for optimal performance with your specific ISP.
Auto-reconnect If this is enabled, the router will automatically connect to your ISP after your
system is restarted or if the PPPoE connection is dropped.
Field Description