Installation guide

Configuring the router
17
Make sure that you remove existing PPPoE client software installed on your
computers.
To configure PPPoE:
1 Access the Configuration menu by following the instructions in To access
the Web-based configuration utility: on page 13.
2 Click the
WAN button. The WAN Settings screen opens.
3 Click
PPPoE, then enter the following settings, as appropriate:
Field Description
Dynamic PPPoE Click this if you receive an IP address automatically from your ISP.
Static PPPoE Click this if you have an assigned (static) IP Address.
User Name Your PPPoE username provided by your ISP.
Password Your PPPoE password.
Retype Password Re-enter the PPPoE password
Service Name The Service Name provided by your ISP (optional).