DVD Player DX-DVD2 USE R GUI DE
DVD Player Contents Important safety instructions....................................................................2 Features ....................................................................................................6 Setting up your DVD player .....................................................................11 Using your DVD player.............................................................................13 Troubleshooting...................................................................
DVD Player 3 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
DX-DVD2 4 Introduction To ensure correct use of your player, read this owner’s manual carefully and retain for future reference. About the symbol The symbol may appear on your TV display during operation and indicates that the function is not permitted by your player or specific media. Notes: • Do not use irregularly shaped CDs (for example, heart-shaped or octagonal). Doing so may result in malfunctions.
DVD Player 5 This product incorporates copyright protection technology that is protected by U.S patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
DX-DVD2 6 Features Front panel 7 6 1 Item 2 Description 3 4 Function 1 Disc tray Place a disc on the tray when it opens. 2 (OPEN/CLOSE) button Press to open or close the disc tray. 3 (Play/Pause) Press to begin playback. Press again to pause playback. Press again to resume playback. 4 (stop) Press to stop playback. Playback begins from this point when you press PLAY. Press STOP twice to begin playback from the beginning.
DVD Player 7 Back panel 4 1 2 Item 3 Description 5 Function 1 AC power cable Plug this cable into an AC power outlet. 2 Composite video output Connect to the composite video input jack on a TV (if available). 3 Component output (Y Cb Cr) Connect to the component video input jacks on a TV (if available). 4 Audio output (left/ right) Connect to the audio input jacks (left and right) of a TV, amplifier, or other equipment.
DX-DVD2 8 Remote control Remote control 1 11 2 12 3 4 5 6 7 8 9 10 Item Button 13 14 15 16 17 Function 1 STANDBY/ Press to turn your player on or off. 2 SETUP Press to open and close the setup menu. 3 (Left arrow) (Up arrow) (Right arrow) (Down arrow) Press to select menu options or adjust settings. 4 OK Press to make or confirm menu selections. 5 DISPLAY Press to open the on-screen display, which provides current status information and where you can change settings and options.
DVD Player 9 Item Button Function 8 (fast reverse) Press to fast reverse the DVD or CD. Press repeatedly to step through the fast reverse speeds. 9 (previous) Press to return to the previous chapter (DVD) or track (CD). 10 REPEAT Press during playback to step through repeat options, including repeat current chapter, repeat current title, repeat entire disc, and off. 11 OPEN/CLOSE Press to open and close the disc tray. 12 DVD MENU Press to open the DVD menu.
DX-DVD2 10 Installing remote control batteries To install the remote control battery: 1 Open the battery tray. 2 If this is the first time you will be using the remote control, remove the plastic insulation sheet that covers the battery. -ORIf you are replacing the battery, remove the old battery and insert a new lithium coin cell battery (CR2025) into the battery tray. Make sure that you match the + symbol on the battery with the + symbol on the battery tray. 3 Replace the battery tray.
DVD Player 11 Setting up your DVD player Unpacking and setting up Package contents: • DVD player (1) • Remote control (1) • Battery (CR2025) (1) • Audio/Video cable (1) • User Guide (1) • Quick Start Guide (1) • Digital Television Transition (1) If you need to replace any of these items, call our help line mentioned in the Warranty section of this guide. Carefully remove all of the components from the carton and make sure that you have all of the necessary components before you dispose of the carton.
DX-DVD2 12 Making connections Easy DVD connection guide: For the best possible picture, follow these guidelines and use the best cables your TV accepts: • Normal—Composite video • Better—Component video Composite connection TV A/V cable connectors are color-coded. Connect yellow (video) to yellow, red (audio right) to red, and white (audio left) to white. A/V cable DVD player Component connection TV Component cable connectors are color-coded.
DVD Player 13 Component connection with digital audio TV Digital audio amplifier Component cable connectors are color-coded. Connect yellow (Y) to yellow, blue (Pb or Cb) to blue, and green (Pr or Cr) to green. Digital coaxial cable DVD player Component cable Using your DVD player Power source Use the polarized AC line cord provided for operation on AC power. Insert the AC cord plug into a standard 120 V 60 Hz polarized AC outlet.
DX-DVD2 14 Turning your player on and off To turn your player on and off: 1 Plug the power cord into an AC power outlet. 2 Press the STANDBY/ button to turn on your player. 3 Press the STANDBY/ button again to turn off your player. Playing a disc To play a disc: 1 2 3 4 Turn on your player and your TV. Press OPEN/CLOSE ( ) to open the disc tray. Load the disc into the tray, with the label side up. Press OPEN/CLOSE ( ) to close the tray. Playback starts automatically.
DVD Player 15 Playback options Remote control functions The following functions are applicable only to DVD discs. If other disc formats are played, screen display and operation will be different. • SETUP—Press this button to display the on-screen setup menu . • DVD MENU—Press this button to display the root menu, then select an item according to your preference. (This key is only valid on DVDs with multi-layer menus.) • TOP MENU—Press this button to display the title menu (available on some DVDs).
DX-DVD2 16 In the menu, press (Up) or (Down) to select a file, then press OK. The file will begin playback. (previous) or (next) to select the previous or the next track. • Press • Press (pause) to pause the current track, then press (play) to return to normal playback. Using the menus To use the General Setup Page: 1 Press SETUP. The General Setup Page opens. 2 Press the (Up), (Down), (Left), or (Right) buttons to move the cursor and highlight a selection, then press OK to confirm your selection.
DVD Player 17 • Progressive Scan—You can set the mode to match your TV. For progressive scan, set to ON, for interlaced, set to OFF. • OSD (on screen display) Language—You can select the language for the setup menus and on-screen display. • Screen Saver—You can choose to have an animated picture on the screen whenever the DVD player is idle for a certain time. • Playback Memory—You can choose to view a disc from the point where it was stopped.
DX-DVD2 18 2 Press the opens. (Left), or (Right) buttons to select Audio. The Audio Setup Page 3 Press the (Up), (Down), (Left), or (Right) buttons to move the cursor and highlight a selection, then press OK to confirm your selection. Options include: • Digital Audio Output—Sets the audio outputs. This DVD player produces two kinds of audio output, Bitstream or PCM. This surround sound format is output to a Dolby Digital/DTS decoder through the coaxial and optical jacks on the back of the player.
DVD Player 19 To use the Preferences Setup Page: 1 Press SETUP. The General Setup Page opens. 2 Press the opens. (Left), or General (Right) buttons to select Preference. The Preferences Page Au dio Preference P reference P age Audio Subtitle Disc Menu Default E NG Off E NG Go to Preference Page 3 Press the (Up), (Down), (Left), or (Right) buttons to move the cursor and highlight a selection, then press OK to confirm your selection.
DX-DVD2 20 • Disc Menu—Lets you set the preferred menu language as the default when playing DVD. (If the DVD supports the language). • Default—Resets to all the manufacturer's original settings for this DVD player Press OK to perform the reset. 4 Press (Left) to return to the previous menu. 5 Press SETUP to exit the on-screen menus. Troubleshooting Check the following guide for the possible causes and solutions for a problem before contacting the nearest service center or dealer for repairs.
DVD Player 21 Maintaining Care and handling of discs Handling discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Storing discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Cleaning discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion.
DX-DVD2 22 Resetting your player Reset your player if you observe any of the following symptoms: • When your player is plugged in, but the power will not turn on or off. • When the display window is not working. • When your player does not operate normally. To reset your player: • Unplug the power cord for 30 minutes, then plug in the power cord again. This should reset your player.
DVD Player 23 Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
DX-DVD2
DVD Player 25 90-day limited warranty Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-DVD2 (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of 90 days from the date of your purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Dynex brand products and packaged with this warranty statement. This warranty does not cover refurbished Product.
DX-DVD2 This warranty also does not cover: • Damage due to incorrect operation or maintenance • Connection to an incorrect voltage supply • Attempted repair by anyone other than a facility authorized by Dynex to service the Product • Products sold as is or with all faults • Consumables, such as fuses or batteries • Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
DVD Player 27
www.dynexproducts.com (800) 305-2204 © 2009 Best Buy Enterprise Services, Inc. All rights reserved. DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A.
