Instruction manual

Copyright © 2004-2005 Baby Lock USA
Customer Support: 1-800-313-4110
BLG Ver 2.02 Update – p.5
8.
Unplug the USB cable and turn the machine off and on again.
Other USB Device (Flash Drive) Update Instructions
1.
Download the Baby Lock Ellegante version 2.02 Update “BLG202.upg” from the Baby Lock Web
site (http://www.babylock.com/downloads/) to your USB device (Flash Drive).
2.
If the Baby Lock Ellegante power is on, turn off the main power switch.
3.
While holding down the automatic needle threading button, turn on the main power switch. Press the
USB icon button on the left.
4.
Connect the USB media with the file “BLG202.upg” to the
USB connection on the side of your Babylock Ellegante.
Press the USB icon on the left side of the display.
5. Press “Load”.
The upgrade file will load.
6.
Note:
If an error occurs, a red text error message will appear.
If the download is performed successfully, an “Upgrade completed.” Message will appear.
7.
Remove the USB media, and turn the machine off and on again.