User guide

Programming universal remote controls
39
DX-26L100A13
Outputs
Audio
Power
Miscellaneous
Programming universal remote
controls
Programming a different universal
remote control
You can operate your Dynex TV with a new or existing
universal remote control.
To program a different universal remote control:
1 See the table below for common codes. If you have
problems programming your remote or need a
different remote control code, visit
www.dynexproducts.com/remotecodes for the
latest remote control code information.
2 Follow your universal remote control’s instructions
to enter the TV code you found in Step 1.
For additional help and information…
1. Visit http://www.dynexproducts.com/remotecodes
2. Call technical support for the universal remote control
or cable/satellite company of the remote/set-top box you
are trying to program.
3. Call the Dynex Customer Care Center 1-800-305-2204
Common universal remote control codes
The following is a list of the most common remote control
codes. Codes for other remote controls are available
online at: www.dynexproducts.com/remotecodes, or
check with your cable or satellite TV provide for the
remote control code.
Dynex TV codes for universal remote controls (for all
Dynex TVs manufactured after Jan. 1, 2007)
Composite video 1 (side)
Shared audio (component
and composite)
No
S-Video No
PC/VGA 1 (side)
3.5mm PC audio input 1 (side)
USB 1 (side)
Supports JPEG and
firmware upgrade
DX-26L100A13
Video No
Analog audio 1 (side)
Digital audio 1 Coaxial (side)
WiFi No
Ethernet No
Headphone 1 (side)
DX-26L100A13
Watts/Channel 6W
Number of Speakers 2
DX-26L100A13
Power consumption On: 75 W
Standby: <1 W
Power input 120V/60Hz
DX-26L100A13
OSD languages English, French, Spanish
INlink No
Game Mode No
ENERGY STAR qualified No
Internet connectable No
TV base screws M4 type (16 mm length)
(6 pcs)
V-Chip (version 2.0) Ye s
Sleep timer Ye s
Channel labeling No
VESA mount (mm)
(horizontal × vertical)
200 × 100
Note
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
Tips
• If your universal remote control has a code
search feature, run a code search to identify a
code that matches your TV. See your universal
remote control’s instructions for details.
• If your universal remote control has a “Learn”
feature, you can manually program it using the
Dynex TV remote to “teach” the commands one
at a time. See your universal remote control’s
instructions for details.
Notes
• This note only goes with TV/Blu-ray or TVs.
• The following codes may not provide full
functionality. You may need to use the remote
control that came with your TV, especially to
control the Blu-ray or DVD functions.
Universal remote control makes and models
One for All 0054
Phillips 0198, 0490
RCA 135
Sony
068, 069, 078, 096, 100, 164,
168, 229, 026
12-0954_DX-26L100A13 MAN_V3_EN.book Page 39 Monday, September 24, 2012 12:41 PM