User guide

Restoring settings to default
33
DX-26L100A13
8 When you complete the label, press MENU. The next
time you press INPUT, the new label appears in the
INPUT SOURCE list.
9 Press EXIT to close the menu.
Restoring settings to default
To restore settings to default:
1 Press MENU. The on-screen menu opens with the
Picture menu displayed.
2 Press  or  to highlight Settings, then press . The
Settings menu opens.
3 Press  or  to highlight Reset Default, then press
ENTER. A confirmation box opens.
4 Press  or  to select Ye s (to reset all settings to
factory default), or No (to not reset).
5 Press EXIT to close the menu.
Using a USB flash drive
You can connect a USB flash drive to your TV to view
compatible JPEG pictures.
Switching to USB mode
To switch to USB mode:
1 Make sure that you have connected the USB flash
drive to the USB port on the side of your TV.
2 Press INPUT. The INPUT SOURCE list opens.
3 Press  or  to highlight USB, then press ENTER.
Browsing photos
To browse photos on a USB flash drive:
1 Switch to USB mode (see “Switching to USB mode”
on page 33).
2 Press MENU. The USB menu opens.
3 Press  to access the menu. Photos is highlighted.
4 Press ENTER to access the menu. The USB Photos
menu opens with Browse Photos highlighted.
5 Press ENTER. The screen displays folder names and
photo files stored on the USB flash drive in a
thumbnail index with the first photo or folder
highlighted. A control bar appears at the bottom of
the screen.
6 To navigate the thumbnail index screen, press:
•
   or  to browse through the files and
folders.
• ENTER to view a highlighted photo full screen, or
open a highlighted folder.
• MENU to open the USB menu.
• FAV or FAVORITE to add or remove a photo from
the favorite photo list. A heart appears on a
photo that has been added to the list.
Caution
When you restore default settings, all the settings
(except the password and parental rating) you have
customized are reset.
Notes
The JPEG picture viewer only supports JPEG format
images (with “.jpg” file extensions).
Not all JPEG files are compatible with your TV.
Note
To exit USB mode, press INPUT to open the INPUT
SOURCE list, then select another input source.
Move
Select Back
MENU
Exit
EXIT
Picture Mode
Backlight
Sharpness
Tint
Color
Brightness
Contrast
Advanced Video
Reset Picture Settings
Picture Audio Settings Channels USB
Energy Savings
65
47
65
0
55
26
Set various TV options
Move
Select Back
MENU
Exit
EXIT
Parental Controls
System Info
Input Label
Computer Settings
Menu Settings
Closed Caption
Time
Power on in Vivid Mode
Reset Default
Picture Audio Settings Channels USB
photos
12-0954_DX-26L100A13 MAN_V3_EN.book Page 33 Monday, September 24, 2012 12:41 PM