User guide

Adjusting the sound
23
DX-26L100A13
2 Press  or  to highlight Audio, then press . The
Audio menu opens.
3 Press  or  to highlight an option, then press  or
 to adjust the setting. You can select:
• Sound Mode—Selects the EQ sound mode. You
can select Standard, News, Music, Movie, or
Custom.
• Treble—Adjusts the high sounds.
• Bass—Adjusts the low sounds.
• Balance—Adjusts the balance between the left
and right audio channels.
• Digital Audio/SPDIF—Selects the preferred
audio format for digital audio signals. Options
include PCM (to output the audio in 2-channel
stereo), or RAW (to pass through the original
digital audio sound).
• Audio Language—Selects the default language
track when watching digital TV programs.
Options include English, Français (French), and
Español (Spanish).
• MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
• Mono–if there is noise or static on weak
stereo broadcasts.
• Stereo–for programs broadcast in stereo.
• SAP–to listen to a secondary audio program
(if available).
• Reset Audio Settings— Resets all audio settings
to factory defaults.
4 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Playing TV audio only
You can turn off the picture on your TV and listen to the
program audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens with the
Picture menu displayed.
2 Press  or  to highlight Channels, then press .
The Channels menu opens.
3 Press  or  to highlight Audio Only, then press
ENTER.
4 Press  or  to select On.
5 Press MENU to return to the previous menu, or press
EXIT to close the menu. The picture turns off in
approximately 3 to 5 seconds.
Note
You can also press AUDIO on the remote control to
select the audio mode.
Note
You can also press MTS/SAP on the remote control
one or more times to select the audio mode.
Move
Select Back
MENU
Exit
EXIT
Sound Mode
Audio Language
Digital Audio/SPDIF
Balance
Bass
Treble
MTS/SAP
Reset Audio Settings
Picture Audio Settings Channels USB
Standard
50
50
50
PCM
English
Mono
Notes
• Audio only works only when the input source is
TV and your TV is receiving a broadcast signal.
• To exit audio only mode, press any button
except the power button. When you exit audio
only mode, the Audio Only option is
automatically reset to Off.
Move
Select Back
MENU
Exit
EXIT
Picture Mode
Backlight
Sharpness
Tint
Color
Brightness
Contrast
Advanced Video
Reset Picture Settings
Picture Audio Settings Channels USB
Energy Savings
65
47
65
0
55
26
Adjust channel options
Move
Select Back
MENU
Exit
EXIT
Auto Channel Scan
Auto Zoom
Audio Only
Channel Strength
Channel Label
Favorites
Add/Skip Channels
Picture Audio Settings Channels USB
On
12-0954_DX-26L100A13 MAN_V3_EN.book Page 23 Monday, September 24, 2012 12:41 PM