User guide

Adjusting the picture
21
DX-26L100A13
• Press the number buttons to enter the channel
number you want, then wait for the channel to
change or press ENTER to immediately change the
channel.
• To select a digital sub-channel, press the number
buttons to select the main digital channel, press
.
(dot), then press the number button for the
sub-channel. Wait for the channel to change, or
press ENTER to immediately change the channel.
• Press RECALL to go to the last viewed channel. Press
RECALL again to return to the channel you were
watching.
• Press CH-LIST to open the channel list, press
 or 
to highlight a channel, then press ENTER. Hidden
channels are grayed out on the Channel list.
• Press FAV or FAVORITE to open the favorite channel
list, press
 or  to highlight a channel, then press
ENTER.
Adjusting the volume
To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the
volume.
• Press MUTE to turn off the sound. Press MUTE
again to turn the sound back on.
Viewing program information
To view channel information:
• Press INFO to view an information banner. The
information banner shows the current program
information such as channel number, video input
source, and resolution.
• Digital channel information—Displays the
channel number, station name, channel label,
broadcast program name, TV rating, signal type,
audio information, resolution, CC mode, current
time, and current program start and end times.
• Analog channel information—Displays channel
number, channel label (if preset), signal type, and
audio information.
Adjusting the picture
Adjusting the TV picture
To adjust the TV picture:
1 Press MENU. The on-screen menu opens with the
Picture menu displayed.
2 Press  or  to highlight an option, press  or  to
adjust the setting, or press  or ENTER to go to the
sub-menu. You can select:
• Picture Mode—Selects the picture mode. You
can select:
• Vivid—(a bright and vivid picture)
Significantly increases the contrast,
brightness, and sharpness. This selection is
good for video games, animation, and in
bright light environments.
• Standard—(a standard picture) Moderately
increases the contrast, brightness, and
sharpness. This selection is good for standard
TV broadcasts.
• Energy Savings—(the backlight brightness
is decreased) Your TV has a backlight that
provides light for displaying the picture. Your
TV uses less energy when you reduce this
backlight.
• Custom—(customized picture) Lets you
manually customize the picture settings such
as brightness, contrast, and sharpness.
• Contrast—Adjusts the brightness of the light
areas of the picture.
• Brightness—Adjusts the brightness of the dark
areas of the picture.
• Color—Adjusts the color intensity of the picture.
A low setting may make the color look faded. A
high setting may make the color look artificial.
• Tint—Adjusts the color balance of the picture.
Use this control to make skin tones look more
natural.
• Sharpness—Adjusts the color detail of images. If
you set this control too high, dark images may
appear with light or white edges.
• Backlight—
Increasing the backlight setting
will increase the brightness and display
performance of the screen. The higher the
setting is, the higher the power
consumption.
• Advanced Video—Opens the Advanced Video
sub-menu where you can adjust additional video
options.
Note
If a list has more than one page, press  or  to scroll
through the pages.
Move
Select Back
MENU
Exit
EXIT
Picture Mode
Backlight
Sharpness
Tint
Color
Brightness
Contrast
Advanced Video
Reset Picture Settings
Picture Audio Settings Channels USB
Energy Savings
65
47
65
0
55
26
Note
You can also press PICTURE on your remote control
to select the picture mode.
12-0954_DX-26L100A13 MAN_V3_EN.book Page 21 Monday, September 24, 2012 12:41 PM