24" LED TV DX-24E310NA15 U SER GUI DE Before using your new product, please read these instructions to prevent any damage.
ii Contents CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iii Turning on your TV for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Understanding the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Turning your TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Selecting the video input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iv Viewing a favorite channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Adding or changing a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Checking the digital signal strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 CHILD SAFETY PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions - new and old- must be supported on proper stands or installed according to the manufacturer's recommendations.
2 DX-24E310NA15 Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV. 1 2 3 4 5 6 7 8 9 10 11 12 13 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
DX-24E310NA15 Power source Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company. Servicing These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
4 DX-24E310NA15 Dynex 24" LED TV Dynex 24" LED TV Introduction Congratulations on your purchase of a high-quality Dynex product. Your DX-24E310NA15 represents the state of the art in LED TV design and is designed for reliable and trouble-free performance. Installing the stand or wall mount bracket Notes • If you plan to wall-mount your TV, do not install the stand. • Store the stand and stand screws in case you decide to use the stand in the future.
Dynex 24" LED TV DX-24E310NA15 2 Find the front of the stand. Front 3 Secure the TV stand to the stand column with the three provided M4 (12 mm) screws. Screw type M4 Screw length 12 mm # of screws 3 www.dynexproducts.
6 DX-24E310NA15 Dynex 24" LED TV Installing the wall-mount bracket Warning This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See “Miscellaneous” on page 57.) 1 Carefully place your TV face-down on a soft surface to protect the screen from damages and scratches. 2 If the TV stand is installed, remove the three screws that secure the stand column to your TV, then remove the stand. www.dynexproducts.
Dynex 24" LED TV DX-24E310NA15 3 Attach the wall-mount bracket to your TV using either the four provided M4 × 8 mm or the M4 x 28 mm screws that came with the TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV. Caution Do NOT use the screws that came with the wall mount because they may be too long. If your wall mount uses spacers, use the provided M4 x 28 mm screws. If your wall mount does not use spacers, use the provided M4 x 8 mm screws.
8 DX-24E310NA15 Dynex 24" LED TV TV components # Item 1 The power indicator: • Turns off when your TV is on. • Lights red when your TV is off Power indicator (standby mode). Remote control The remote control sensor receives sensor signals from the remote control. Do not block. Package contents • • • • • • • Remote control and batteries (2 AAA) TV stand and screws (3) M4 screws (8 mm length) (4 pcs.) wall-mount screws M4 screws (28 mm length) (4 pcs.
Dynex 24" LED TV DX-24E310NA15 Side jacks # 8 9 # Item Description 1 DC IN (12V) Plug the AC power adapter into this connector. USB Connect a USB flash drive to this jack to view compatible JPEG picture files. For more information, see “Connecting a USB flash drive” on page 23 and “Using a USB flash drive” on page 34. HDMI2 Connect an HDMI device to this jack. For more information, see “HDMI (best)” on page 12, 17, 19, or 21. HDMI 1 (DVI) Connect an HDMI device to this jack.
10 DX-24E310NA15 Dynex 24" LED TV Remote control # Button Description 7 CCD Press to turn closed captioning on or off. You can select CC On, CC Off, or CC On When Mute. See “Turning closed captioning on or off” on page 46. 8 ASPECT Press to change how the picture looks on the screen (aspect ratio). See the Aspect Ratio option in “Adjusting the TV picture” on page 37. 9 MENU Press to open the on-screen menu. 10 ENTER Press to confirm selections or changes.
Dynex 24" LED TV DX-24E310NA15 What connection should I use? Your TV has several connection types for connecting devices to your TV. For the best video quality, you should connect a device to the best available connection.
12 DX-24E310NA15 Dynex 24" LED TV Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 11. HDMI (best) On your TV HDMI cable HDMI cable connector Side of TV Cable or satellite box HDMI jack 1 Make sure that your TV’s power adapter is unplugged and all connected equipment is turned off.
Dynex 24" LED TV DX-24E310NA15 DVI (same as HDMI but requires an audio connection) Notes • Your TV supports DVI video only. • You must use the HDMI 1 (DVI) jack to connect a cable box using DVI. • To add sound for a DVI connection, connect external speakers or a sound bar to the cable or satellite box.
14 DX-24E310NA15 Dynex 24" LED TV AV (composite video) (good) Note Cables are often color-coded to match color-coded jacks. Cable or satellite box On your TV AV cable (composite video cable) AV (composite video) cable connector Audio cable connectors Side of TV AV (composite video) jack Analog audio jacks 1 Make sure that your TV’s power adapter is unplugged and all connected equipment is turned off.
Dynex 24" LED TV DX-24E310NA15 15 Coaxial (good) On your TV Coaxial cable Coaxial cable connector Cable or satellite box Side of TV ANT/CABLE IN jack 1 Make sure that your TV’s power adapter is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the antenna or cable TV wall jack.
16 DX-24E310NA15 Dynex 24" LED TV Connecting an antenna or cable TV (no box) On your TV Antenna or cable TV (no box) Coaxial cable Coaxial cable connector Side of TV ANT/CABLE IN jack 1 Make sure that your TV’s power adapter is unplugged and all connected equipment is turned off. 2 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the antenna or cable TV wall jack. 3 Plug your TV’s power adapter into a power outlet, then turn on your TV.
Dynex 24" LED TV DX-24E310NA15 17 Connecting a DVD or Blu-ray player Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 11. HDMI (best) DVD or Blu-ray player On your TV HDMI cable connector HDMI cable Side of TV HDMI jack 1 Make sure that your TV’s power adapter is unplugged and the DVD or Blu-ray player is turned off.
18 DX-24E310NA15 Dynex 24" LED TV Composite video (good) Note Cables are often color-coded to match color-coded jacks. DVD or Blu-ray player On your TV AV cable (composite video cable) AV (composite video) cable connector AV (composite video) jack Audio cable connectors Audio jacks Side of TV 1 Make sure that your TV’s power adapter is unplugged and the DVD or Blu-ray player is turned off.
Dynex 24" LED TV DX-24E310NA15 19 Connecting a game console HDMI (best) On your TV HDMI cable HDMI cable connector Game console HDMI jack Side of TV 1 Make sure that your TV’s power adapter is unplugged and the game console is turned off. 2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the game console. 3 Plug your TV’s power adapter into a power outlet, then turn on your TV.
20 DX-24E310NA15 Dynex 24" LED TV AV (composite video) (good) Notes • Most game consoles come with a special AV (composite video) cable. See the documentation that came with your game console or check the manufacturer’s Web site. • Cables are often color-coded to match color-coded jacks.
Dynex 24" LED TV DX-24E310NA15 21 Connecting a computer HDMI (best) On your TV HDMI cable HDMI cable connector HDMI jack Side of TV 1 Make sure that your TV’s power adapter is unplugged and the computer is turned off. 2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the computer. 3 Plug your TV’s power adapter into a power outlet, then turn on your TV and the computer. 4 Press INPUT to open the INPUT SOURCE list.
22 DX-24E310NA15 Dynex 24" LED TV DVI Notes • Your TV supports DVI video only. • You must use the HDMI 1 (DVI) jack to connect a computer using DVI. • To add sound for a DVI connection, connect external speakers or a sound bar to the computer. On your TV HDMI cable with HDMI-DVI adapter HDMI cable connector Side of TV HDMI 1 (DVI) jack 1 Make sure that your TV’s AC power adapter is unplugged and the computer is turned off.
Dynex 24" LED TV DX-24E310NA15 23 Connecting a USB flash drive USB flash drive Side of TV Caution Do not remove the USB flash drive or turn off the TV while using the USB flash drive. You may lose data or damage the USB flash drive. 1 Plug a USB flash drive into the USB port on the side of your TV. 2 If your TV is turned on when you connect the USB flash drive, press or to select Yes in the message that appears. The PHOTOS menu opens.
24 DX-24E310NA15 Dynex 24" LED TV Connecting headphones When you connect headphones, audio plays through the headphones and the TV speakers are muted. See “Adjusting sound settings” on page 39. Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound.
Dynex 24" LED TV DX-24E310NA15 25 Connecting external speakers or a sound bar Digital audio On your TV Digital coaxial audio cable connector Digital speaker system Digital coaxial audio cable Sound bar Digital coaxial audio jack Side of TV 1 Make sure that your TV’s power adapter is unplugged and the digital speaker system or sound bar is turned off.
26 DX-24E310NA15 Dynex 24" LED TV Analog audio On your TV Analog speaker system Audio cable Sound bar Audio cable connector Side of TV AUDIO OUT/ jack 1 Make sure that your TV’s power adapter is unplugged and the analog speaker system or sound bar is turned off. 2 Connect an audio cable (not provided) to the AUDIO OUT/ jack on the side of your TV and to the AUDIO IN jacks on the analog speaker system. 3 Plug your TV’s power cord into a power outlet, then turn on your TV.
Dynex 24" LED TV DX-24E310NA15 27 Connecting a home theater system with multiple devices Blu-ray player or DVD player Cable or satellite TV box AV receiver Game console USB flash drive Antenna or cable TV connected directly to the wall jack Computer The connections you make depend on the video and audio jacks available on your devices. Refer to the documentation that came with your devices for connection information.
28 DX-24E310NA15 Dynex 24" LED TV Connecting power 1 Plug the AC power adapter into the DC IN (12V) jack on the side of your TV. 2 Plug the other end of the adapter into a power outlet. Notes • Your TV should only be operated from the power source indicated on the label. • Always unplug the power adapter from the power outlet when you will not be using your TV for an extended period of time. www.dynexproducts.
Dynex 24" LED TV DX-24E310NA15 Using the remote control 29 Turning on your TV for the first time Installing remote control batteries 1 While pressing the release latch on the back of the remote control, lift the battery compartment cover off the remote control. The first time you turn on your TV, the Setup Wizard opens. The Setup Wizard guides you through setting up basic settings including the menu language, time setting, picture mode, and the TV signal source.
30 DX-24E310NA15 Dynex 24" LED TV 5 If you selected Auto for Mode, press or to highlight Time Zone, then press or to select your time zone. You can select Eastern, Central, Mountain, Pacific, Alaska, Hawaii, Newfoundland, or Atlantic. 6 If you selected Auto for Mode, press or to highlight Daylight savings time, then press or to select On (if your viewing area observes Daylight Savings Time) or Off (if your viewing area does not observe Daylight Savings Time).
Dynex 24" LED TV DX-24E310NA15 Understanding the basics Turning your TV on or off 1 Make sure that the power adapter is connected to a power outlet. 2 Press (power) to turn on your TV. The power indicator LED turns off. 3 Press (power) again to turn off your TV. Your TV enters Standby mode and the power indicator turns red. Selecting the video input source 1 Turn on your TV. 2 If you want to use a device connected to a video input (such as a DVD or Blu-ray player), turn on the device. 3 Press INPUT.
32 DX-24E310NA15 Dynex 24" LED TV Using the on-screen menus Channels menu (TV mode) Notes • Depending on the signal source selected, you may see different options on your screen. The following menus are shown in TV mode. • Menu items that are not selectable are grayed out. • The screens shown in this manual are for explanation purposes and may vary from the actual screens on your TV.
Dynex 24" LED TV DX-24E310NA15 Selecting a channel 33 Adjusting the volume • Press CH+ or CH– to go to the next or previous channel on the memorized channel list. • Press the number buttons to enter the analog or main digital channel number you want, then wait for the channel to change or press ENTER to immediately change the channel. • To select a digital sub-channel, press the number buttons to select the main digital channel, press , then press the number button for the sub-channel.
34 DX-24E310NA15 Dynex 24" LED TV Using a USB flash drive 3 Press ENTER to access the menu. The photos menu opens with Browse Photos highlighted. You can connect a USB flash drive to your TV to view compatible JPEG pictures. Notes • The JPEG picture viewer only supports JPEG format images (with “.jpg” file extensions). • Not all JPEG files are compatible with your TV. Switching to USB mode 1 Make sure that you have connected the USB flash drive to the USB port on your TV.
Dynex 24" LED TV DX-24E310NA15 When a photo is displayed full screen, a control bar appears at the bottom of the photo. The file name, picture resolution, size, and date are displayed on the bottom of the control bar. If you do not press a button within 10 seconds, the control bar closes. Press INFO to open the control bar again. 6 To navigate the photo screen, press: • to go to the previous photo. • to go to the next photo. • ENTER to rotate the photo clockwise.
36 DX-24E310NA15 Dynex 24" LED TV 3 Press ENTER to access the menu. The photos menu opens. 4 Press or to highlight View Slideshow, then press ENTER. A slideshow begins with the first photo in the current folder. 5 To control the slideshow, press: • ENTER to pause or start the slideshow. • EXIT to exit the slideshow and return to the thumbnail index. • MENU to return to the USB menu. 3 Press ENTER to access the menu. The photos menu opens. 4 Press or to highlight Settings, then press ENTER.
Dynex 24" LED TV DX-24E310NA15 Adjusting the picture Adjusting the TV picture 1 Press MENU. The on-screen menu opens with the Picture menu displayed. 37 • Contrast—Adjusts the brightness of the light areas of the picture. • Brightness—Adjusts the brightness of the dark areas of the picture. • Color—Adjusts the color intensity of the picture. A low setting may make the color look faded. A high setting may make the color look artificial. • Tint—Adjusts the color balance of the picture.
38 DX-24E310NA15 Dynex 24" LED TV • Aspect Ratio—Adjusts how the picture fills the screen. Aspect ratio option Example Normal: Original aspect ratio is preserved. Black bars are present if content is not widescreen (16:9). Automatically adjusting the aspect ratio You can set the picture mode your TV uses when you turn it on. 1 Press MENU. The on-screen menu opens. 2 Press or to highlight Channels, then press or ENTER. The Channels menu opens. Zoom: Expands the image to fill the screen.
Dynex 24" LED TV DX-24E310NA15 Adjusting the sound Adjusting sound settings 1 Press MENU. The on-screen menu opens. 2 Press or to highlight Audio, then press Audio menu opens. . The 39 • MTS/SAP—(Analog channels only) Selects the audio mode. You can select: • Mono—Select this option if there is noise or static on weak stereo broadcasts. • Stereo—Select this option for programs broadcast in stereo. • SAP—Select this option to listen to a secondary audio program, if available.
40 DX-24E310NA15 Dynex 24" LED TV Setting parental controls Parental controls let you prevent your children from watching inappropriate material on TV. When set, parental controls read the rating of the program (with some exceptions, such as news and sports) and deny access to programs that exceed the ratings level you select. To watch programs that exceed the selected rating, you must enter the password. 4 Press the number buttons to enter the four-digit password. The default password is 0000.
Dynex 24" LED TV DX-24E310NA15 Locking control buttons When the button lock is set to Yes, the buttons on the side of your TV are locked, and you can only operate your TV using the remote control. 1 Press MENU. The on-screen menu opens. 2 Press or to highlight Settings, then press . The Settings menu opens with Parental Controls highlighted. 41 6 Press or to select Yes (locks the buttons) or No (unlocks the buttons). 7 Press MENU to return to the previous menu, or press EXIT to close the menu.
42 DX-24E310NA15 Dynex 24" LED TV 6 Press or to select On (turns on parental controls) or Off (turns off parental controls). 7 Press MENU to return to the previous menu, or press EXIT to close the menu. Blocking unrated TV Setting parental control levels You can set parental control levels for the U.S. and Canada. Parental control settings are only applicable to programs that have a rating signal. U.S. rating levels When Block Unrated TV is turned on, you block TV programs that do not have a rating.
Dynex 24" LED TV DX-24E310NA15 43 4 Press the number buttons to enter the four-digit password. The parental controls menu opens. Canadian French ratings E Exempt programming G General audiences 8ans+ Suitable for children 8 and older 13ans+ Suitable for children 13 and older 16ans+ Suitable for children 16 and older 18ans+ Adult only 1 Press MENU. The on-screen menu opens. 2 Press or to highlight Settings, then press . The Settings menu opens with Parental Controls highlighted.
44 DX-24E310NA15 Dynex 24" LED TV Downloading rating information 1 Press MENU. The on-screen menu opens. 2 Press or to highlight Settings, then press . The Settings menu opens with Parental Controls highlighted. 6 To reset the RRT information to the factory default, press or to highlight Reset RRT5, then press ENTER. A box opens. Follow the on-screen instructions. 7 Press EXIT to close the menu. Adjusting time settings Setting the clock 1 Press MENU. The on-screen menu opens.
Dynex 24" LED TV 45 DX-24E310NA15 4 Press or to highlight Date/Time, then press ENTER. The date and time menu opens. Setting the sleep timer You can set the amount of time before your TV automatically turns off. 1 Press MENU. The on-screen menu opens. 2 Press or to highlight Settings, then press . The Settings menu opens.
46 DX-24E310NA15 Dynex 24" LED TV Using closed captioning Selecting the analog closed captioning mode Closed captioning displays a text version of the TV program audio or displays information provided by the broadcaster. Turning closed captioning on or off 1 Press MENU. The on-screen menu opens. 2 Press or to highlight Settings, then press . The Settings menu opens. 3 Press or to highlight Closed Caption, then press ENTER. The closed caption menu opens.
Dynex 24" LED TV DX-24E310NA15 Selecting the digital closed captioning mode Digital channels usually have one or more closed captioning modes. The CC1 mode usually displays a text version of the TV program audio in a small banner. The other CC modes display information provided by the broadcaster. CS1 mode displays a text version of the audio in the same language as the audio. 1 Press MENU. The on-screen menu opens. 2 Press or to highlight Settings, then press . The Settings menu opens.
48 DX-24E310NA15 7 Press or to select Mode, then press select Custom. Dynex 24" LED TV or to Note To reset the closed caption styles to their defaults, set Mode to Default. 8 Press or to highlight an option, then press or to adjust the style. You can select: • Font Style—Selects the font style. • Font Size—Selects the font size. • Font Edge Style—Selects the style of the window edge. • Font Edge Color—Selects the color of the window edge. • Font Color—Selects the color for the words.
Dynex 24" LED TV 5 If you select Custom, press or Custom Label, then press . DX-24E310NA15 to highlight 6 Press or to select a character. 7 Press to move to the next position. Repeat this step to enter additional characters. You can enter as many as 10 characters. If you need to delete a character, enter a blank space. 8 When you complete the label, press MENU. The next time you press INPUT, the new label appears in the INPUT SOURCE list.
50 DX-24E310NA15 Dynex 24" LED TV Hiding channels Setting up a favorite channel list You can hide channels in the channel list. When you press CH+ or CH–, your TV skips the hidden channels. You can still tune to a hidden channel by pressing the number buttons for the channel. 1 Press MENU. The on-screen menu opens. 2 Press or to highlight Channels, then press . The Channels menu opens. 3 Press or to highlight Add/Skip Channels, then press ENTER. The channel list opens.
Dynex 24" LED TV DX-24E310NA15 Viewing a favorite channel 5 Press 51 to move to the channel label field. 1 Press FAV on your remote control. The Favorites channel list opens. 2 Press or to highlight a channel, then press ENTER to tune to the channel. Adding or changing a channel label If a channel is not already labeled, you can label the channel to make it easier to identify. You can also relabel a channel that is already labeled. 1 Press MENU. The on-screen menu opens.
52 DX-24E310NA15 Dynex 24" LED TV Maintaining • Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you. • Storage temperatures are 32° to 122°F (0° to 50°C). • Working temperatures are 41° to 104°F (5° to 40°C). • Do not place your TV in direct sunlight or near a heat source. Cleaning your TV • Before cleaning the screen, unplug your TV from the power outlet.
Dynex 24" LED TV DX-24E310NA15 Video and audio Problem Problem Solution Picture does not fill the screen. There are black bars around the picture. • Change the aspect ratio. An increasing amount of digital TV and movies are presented in wide screen (16:9). See “Adjusting the TV picture” on page 37. No picture (screen is not lit) and no sound. • Press (power) on the TV or the remote control. • Make sure that the video cables are connected securely to the side of your TV.
54 DX-24E310NA15 Problem Only snow (noise) appears on the screen. Dotted lines or stripes appear on the screen. Double images. Dynex 24" LED TV Solution Problem • Try another channel. The station may be experiencing problems. • Make sure that the antenna or cable TV is connected correctly and securely. See “Connecting a cable or satellite box” on page 12 or “Connecting an antenna or cable TV (no box)” on page 16. • If you are using an antenna, the digital channel signal may be low.
Dynex 24" LED TV Problem After images appear. DX-24E310NA15 General Solution • Do not display a still image, such as a logo, game, or computer image, for an extended period of time. This can cause a permanent after-image to be burned into the screen. This type of damage is not covered by your warranty. Problem No power. • Make sure that the power adapter is correctly connected to your TV and a working power outlet.
56 DX-24E310NA15 Problem One or more channels do not display. Password is lost. Dynex 24" LED TV Specifications Solution • Make sure that the channels are not blocked. See “Setting parental control levels” on page 42. • Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See “Hiding channels” on page 50.
Dynex 24" LED TV DX-24E310NA15 Programming universal remote controls Outputs Video Analog audio/Headphone Digital audio WiFi Ethernet No 1 (side) 1 (coaxial) (side) No No You can operate your Dynex TV with a new or existing universal remote control. 1 See the table below for common codes. If you have problems programming your remote or need a different remote control code, visit www.dynexproducts.com/remotecodes for the latest remote control code information.
58 DX-24E310NA15 Dynex 24" LED TV Dynex TV codes for universal remote controls (for all Dynex TVs manufactured after Jan. 1, 2007) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Dynex 24" LED TV DX-24E310NA15 One-year limited warranty - Dynex Televisions Definitions: Dynex Products ("Dynex") warrants to you, the original purchaser of this new Dynex-branded television ("Product"), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product ("Warranty Period").
www.dynexproducts.com US and Canada Market - (800) 305-2204 DYNEX is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2014 Best Buy. All rights reserved.
