09-0442 DX_DPF7-10_MAN_ENG_V1.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 2 Tuesday, July 7, 2009 3:00 PM 2 7” Digital Picture Frame Contents Important safety instructions ...................................2 Features ....................................................................4 Setting up your digital picture frame ........................8 Using your digital picture frame .............................15 Troubleshooting .....................................................17 Specifications ..........................................
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 3 Tuesday, July 7, 2009 3:00 PM Important safety instructions 3 6 Clean only with a dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 4 Tuesday, July 7, 2009 3:00 PM 4 Features 15 Batteries should not be exposed to excessive heat such as sunshine, fire, or the like. Caution: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 5 Tuesday, July 7, 2009 3:00 PM 5 Features # Button Description 2 MODE/ENTER In picture mode, press to toggle between slideshow, browse, and thumbnail views. In menu mode, press to confirm a selection. 3 EXIT Press to enter the Main menu. On the Main menu, press to enter the Card Selection screen.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 6 Tuesday, July 7, 2009 3:00 PM 6 Features DC 5V SD/MMC/XD MS Side views # Slot/Port/Jack Description 1 Memory card slot Insert an SD, SDHC, MMC, MS, or xD memory card (not provided) into this slot to view pictures. 2 USB port Insert a USB flash drive (not provided) into this port. 3 DC 5 V jack Plug the AC adapter (provided) into this jack to provide power to your digital picture frame.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 7 Tuesday, July 7, 2009 3:00 PM 7 Features Remote control # Button Description 1 MENU Press to enter the Setup Menu screen. 2 EXIT Press to return to the Main menu. On the Main menu, press to enter the Card Selection screen.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 8 Tuesday, July 7, 2009 3:00 PM 8 # 3 Setting up your digital picture frame Button Description (prev), (next), Press (prev) to navigate left in the on-screen (up), (down)/ menus or to go to the previous picture. ROTATE Press (next) to navigate right in the on-screen menus or to go to the next picture. Press (up) to navigate up in the on-screen menus. Press (down)/ ROTATE to navigate down in the on-screen menus or to rotate a picture.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 9 Tuesday, July 7, 2009 3:00 PM Setting up your digital picture frame 9 Warning: There is a danger of explosion if the battery is not replaced correctly. Replace with the same or equivalent type battery. To install a remote control battery: 1 Turn the remote control over to the back side. 2 Push the release tab to the right and pull the battery tray out of the remote control.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 10 Tuesday, July 7, 2009 3:00 PM 10 Setting up your digital picture frame 4 Slide the battery tray back into the remote control until it clicks into place. Warnings: • Store the battery in a place where children cannot reach it. If a child accidently swallows the battery, consult a doctor immediately. • Do not recharge, short, disassemble, or heat the battery, or dispose of it in a fire.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 11 Tuesday, July 7, 2009 3:00 PM 11 Setting up your digital picture frame Making connections Connecting the AC adapter Make sure that the AC power outlet matches the AC adapter’s power specifications (100-240 V ~, 50/60 Hz) prior to plugging in the adapter. To connect the AC adapter: 1 Complete all other connections. 2 Plug the small DC power connector into the DC 5V jack on the side of your digital picture frame, then plug the other end into an AC power outlet.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 12 Tuesday, July 7, 2009 3:00 PM 12 Setting up your digital picture frame Positioning your digital picture frame Your digital picture frame has a built-in stand. The stand can be rotated to support the frame in either a horizontal or a vertical position. Make sure that the stand is rotated to a position indicated on the back of the frame in order to ensure stability. Your frame can also be wall-mounted.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 13 Tuesday, July 7, 2009 3:00 PM Setting up your digital picture frame 13 Configuring your digital picture frame To configure your digital picture frame: 1 Press EXIT. The Main menu opens. 2 Press or to highlight the SETTING icon, then press MODE/ENTER. The Setup menu opens. 3 Press , or to highlight an option, then press MODE/ENTER to confirm.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 14 Tuesday, July 7, 2009 3:00 PM 14 Setting up your digital picture frame • Brightness–Adjust Brightness from -3 to +3. • Sleep Time–Set your digital picture frame to turn off automatically after a set period of time. • Slide Show Time–Adjusts the interval between pictures changing in a slideshow. Options are 5 Seconds, 10 Seconds, 30 Seconds, 60 Seconds, 60 Minutes, 24 Hours, and Off. • Transition Effect–Select the transition effect to be used during slideshows.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 15 Tuesday, July 7, 2009 3:00 PM Using your digital picture frame 15 Using your digital picture frame Starting a picture slideshow To start a picture slide show: 1 Power on the frame. A slideshow of pictures will immediately begin. If no memory card or USB device has been inserted, the slideshow will be of pictures stored in the frame's internal memory.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 16 Tuesday, July 7, 2009 3:00 PM 16 Using your digital picture frame 5 Press MODE/ENTER again in BROWSE mode to display THUMBNAIL mode. Thumbnail-sized pictures appear on the screen in a table. 6 Press , , , or to highlight a thumbnail. 7 Press MODE/ENTER to display the picture. 8 To switch to a different memory device, press EXIT twice from SLIDESHOW, BROWSE or THUMBNAIL modes.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 17 Tuesday, July 7, 2009 3:00 PM 17 Troubleshooting To delete pictures from internal memory: 1 Remove any card or USB memory device you have inserted in the frame. 2 Locate the picture you wish to delete in SLIDESHOW or BROWSE mode, then press COPY/DEL. A message asks if you want to delete the picture. 3 Press or to highlight YES, then press MODE/ENTER to confirm.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 18 Tuesday, July 7, 2009 3:00 PM 18 Troubleshooting Problem Solution The frame displays some Higher resolution pictures load more slowly. Try pictures slower and some reducing the size of your images using picture editing pictures faster. software (not included) or setting your camera to take pictures at a lower resolution. See your camera's operating manual for details on how to reduce the resolution of images taken.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 19 Tuesday, July 7, 2009 3:00 PM 19 Specifications Specifications Picture format JPEG Panel size Memory card formats Power source 7 inch SD, SDHC, xD, Memory Stick™, and USB flash drives AC adapter (5V DC) Power consumption Operating temperature <5W 41~95°F (5~35°C) Weight 1.0 lb. (0.45 kg) Dimensions (W × H × D) 8.8 × 6.2 × 1.2 inches (224 × 157 × 30 mm) Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 20 Tuesday, July 7, 2009 3:00 PM 20 Legal notices which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 21 Tuesday, July 7, 2009 3:00 PM Legal notices 21 90-day limited warranty Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-DPF7-10 (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of 90 days from the date of your purchase of the Product (“Warranty Period”).
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 22 Tuesday, July 7, 2009 3:00 PM 22 Legal notices Where is the warranty valid? This warranty is valid only to the original purchaser of the Product in the United States, Canada, and Mexico.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 23 Tuesday, July 7, 2009 3:00 PM Legal notices 23 WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE. Contact Dynex: For customer service please call 1-800-305-2204 www.dynexproducts.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 24 Tuesday, July 7, 2009 3:00 PM www.dynexproducts.com (800) 305-2204 Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A. © 2009 Best Buy Enterprise Services, Inc. All rights reserved. DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
