DX-PS12CC_13-0085 MAN_V2.fm Page 1 Tuesday, January 29, 2013 9:25 PM 12-sheet Crosscut Paper Shredder DX-PS12CC U S ER G U I D E Before using your new product, please read these instructions to prevent any damage.
DX-PS12CC_13-0085 MAN_V2.fm Page 2 Tuesday, January 29, 2013 9:25 PM 12-sheet Crosscut Paper Shredder Contents Important safety instructions....................................................................2 Features ....................................................................................................3 Package contents ......................................................................................4 Setting up the shredder .............................................................
DX-PS12CC_13-0085 MAN_V2.fm Page 3 Tuesday, January 29, 2013 9:25 PM 12-sheet Crosscut Paper Shredder 3 Do not spray or keep any aerosol products in or around shredder. Avoid loose clothing or jewelry touching the document feed opening. Avoid getting your hair near the document feed opening. 1 RISK OF FIRE. Never use any petroleum based or flammable oils or lubricants in or around the machine as some oils can combust causing serious injury.
DX-PS12CC_13-0085 MAN_V2.fm Page 4 Tuesday, January 29, 2013 9:25 PM 4 DX-PS12CC Package contents • • • • • Shredder body Wastebasket Shredder head Casters (4) User Guide Setting up the shredder Warning: Crosscut shredders have very sharp exposed blades on the underside. Use care when mounting the shredder on the wastebasket. Caution: The shredder should not be plugged in during assembly. Note: The following illustrations are for information purposes only.
DX-PS12CC_13-0085 MAN_V2.fm Page 5 Tuesday, January 29, 2013 9:25 PM 12-sheet Crosscut Paper Shredder 2 Firmly press all four caster wheels into the bottom of the shredder body. 3 Slide the wastebasket out of the shredder body.
DX-PS12CC_13-0085 MAN_V2.fm Page 6 Tuesday, January 29, 2013 9:25 PM 6 DX-PS12CC 4 Using the handle on the shredder head, lift and gently place the shredder head onto the rim of the shredder body. Make certain the clips on the edge of the body are lined up with the openings underneath the shredder head. The curved flap-like shape located on the back of the shredder head should also align and fit properly as shown.
DX-PS12CC_13-0085 MAN_V2.fm Page 7 Tuesday, January 29, 2013 9:25 PM 7 12-sheet Crosscut Paper Shredder 6 Complete assembly by sliding the wastebasket back in. Plug shredder into a nearby socket-outlet and switch the power mode over to “Auto”. Make sure that the wastebasket is slid fully into the shredder body. This shredder features a safety power cutoff and does not operate if the wastebasket is removed.
DX-PS12CC_13-0085 MAN_V2.fm Page 8 Tuesday, January 29, 2013 9:25 PM 8 DX-PS12CC 1 To begin shredding, locate the switch on the shredder (on the top, at the right rear corner) and select the “Auto” mode. The Green Power LED indicates the shredder is On and ready to use. Position Setting | AUTO/ON This setting allows the shredder to be automatically started by inserting paper into the shred opening. Always feed the paper in as straight as possible.
DX-PS12CC_13-0085 MAN_V2.fm Page 9 Tuesday, January 29, 2013 9:25 PM 12-sheet Crosscut Paper Shredder 9 Caution: • Never feed more than one credit card or CD/DVD at a time. • Only shred credit cards by feeding them vertically into the middle of the entry, releasing when shredding begins. Never feed more than one credit card at a time. • Do not activate the reverse function while shredding credit cards or CDs/DVDs. • Hold the CD/DVD by the edge and feed one at a time, releasing when shredding begins.
DX-PS12CC_13-0085 MAN_V2.fm Page 10 Tuesday, January 29, 2013 9:25 PM 10 DX-PS12CC Troubleshooting If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you continue to have problems, contact customer support at our Service Center. DO NOT ATTEMPT TO REPAIR BY OPENING THE SHREDDER HEAD. This will completely void the product warranty.
DX-PS12CC_13-0085 MAN_V2.fm Page 11 Tuesday, January 29, 2013 9:25 PM 12-sheet Crosscut Paper Shredder Specifications Sheet capacity 12 sheets of 20 lb. bond paper (one folded sheet of paper equals two sheets of paper.) Paper shred size 7/32 in x 2 5/32 in pieces (0.56 cm x 5.5 cm) Paper entry width 8.7 in (22.0 cm) Credit card and CD capacity One at a time Voltage 120V~60Hz/3.
DX-PS12CC_13-0085 MAN_V2.
DX-PS12CC_13-0085 MAN_V2.fm Page 13 Tuesday, January 29, 2013 9:25 PM 12-sheet Crosscut Paper Shredder 13 One-year limited warranty Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-PS12CC (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
DX-PS12CC_13-0085 MAN_V2.fm Page 14 Tuesday, January 29, 2013 9:25 PM 14 DX-PS12CC • Consumables, such as fuses or batteries • Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
DX-PS12CC_13-0085 MAN_V2.fm Page 16 Tuesday, January 29, 2013 9:25 PM www.dynexproducts.com (800) 305-2204 Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A. © 2013 BBY Solutions, Inc. All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
