DX-PS12CC_12-0052 MAN_V1.
DX-PS12CC_12-0052 MAN_V1.fm Page 2 Friday, February 3, 2012 7:59 AM 12-sheet Crosscut Paper Shredder Contents Important safety instructions....................................................................2 Features ....................................................................................................3 Package contents ......................................................................................3 Setting up the shredder ..............................................................
DX-PS12CC_12-0052 MAN_V1.fm Page 3 Friday, February 3, 2012 7:59 AM 12-sheet Crosscut Paper Shredder 3 Avoid loose clothing or jewelry touching the document feed opening. Avoid getting your hair near the document feed opening. 1 RISK OF FIRE. Never use any petroleum based or flammable oils or lubricants in or around the machine as some oils can combust causing serious injury.
DX-PS12CC_12-0052 MAN_V1.fm Page 4 Friday, February 3, 2012 7:59 AM 4 DX-PS12CC Setting up the shredder Warning: Crosscut shredders have very sharp exposed blades on the underside. Use care when mounting the shredder on the wastebasket. Caution: The shredder should not be plugged in during assembly. Note: The following illustrations are for information purposes only. Your actual shredder may look somewhat different than the shredder shown.
DX-PS12CC_12-0052 MAN_V1.fm Page 5 Friday, February 3, 2012 7:59 AM 12-sheet Crosscut Paper Shredder 5 3 Slide the wastebasket out of the shredder body. 4 Using the handle on the shredder head, lift and gently place the shredder head onto the rim of the shredder body. Make certain the clips on the edge of the body are lined up with the openings underneath the shredder head. The curved flap-like shape located on the back of the shredder head should also align and fit properly as shown.
DX-PS12CC_12-0052 MAN_V1.fm Page 6 Friday, February 3, 2012 7:59 AM 6 DX-PS12CC 5 When aligned, gently push down on the shredder head until it sits flush on the shredder body. (There should be no space between the shredder head and the shredder body.) Push down Push down Correct fit Incorrect fit 6 Complete assembly by sliding the wastebasket back in. Plug shredder into a nearby socket-outlet and switch the power mode over to “Auto”.
DX-PS12CC_12-0052 MAN_V1.fm Page 7 Friday, February 3, 2012 7:59 AM 7 12-sheet Crosscut Paper Shredder Using the shredder LED status indicators: Overheat (red light) Paper Overload (red light) Door Open (red light) Power On (green light) To use the shredder: Caution: • Do not overfeed the shredder: Shredding beyond the specified sheet capacity can result in extensive damage to the shredder. Overfeeding will strain the machine and quickly wear and break the cutting blades and internal components.
DX-PS12CC_12-0052 MAN_V1.fm Page 8 Friday, February 3, 2012 7:59 AM 8 DX-PS12CC 2 Press the designated “push open” area on the handle of the cover (on top) to tilt open and expose the paper feed slot. The cover will click into a preset position for safe shredding.* With the feed slot now open, you can shred sheets of paper or one credit card per pass.
DX-PS12CC_12-0052 MAN_V1.fm Page 9 Friday, February 3, 2012 7:59 AM 12-sheet Crosscut Paper Shredder 9 Maintaining Caution: Failure to properly maintain your shredder will void the warranty. • Crosscut shredders require regular oil lubrication for optimal performance and extended lifespan. We recommend you oil your shredder once a month. To lubricate your shredder, drizzle some basic vegetable or cooking oil (nothing flammable or petroleum based) onto a few sheets of paper and feed it into the shredder.
DX-PS12CC_12-0052 MAN_V1.fm Page 10 Friday, February 3, 2012 7:59 AM 10 DX-PS12CC Sympton Possible Solutions The shredder runs in "Rev" • While in "Auto" mode, the motor will not start running until paper is inserted mode but not in "Auto" mode. into the feed slot. Set the unit to "Auto" and insert the paper to be shredded. It is normal for the motor to run for a moment after setting it to "Auto" but it should stop until paper is inserted.
DX-PS12CC_12-0052 MAN_V1.fm Page 11 Friday, February 3, 2012 7:59 AM 12-sheet Crosscut Paper Shredder 11 One-year limited warranty Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-PS12CC (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
DX-PS12CC_12-0052 MAN_V1.fm Page 12 Friday, February 3, 2012 7:59 AM 12 DX-PS12CC • Consumables, such as fuses or batteries • Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
DX-PS12CC_12-0052 MAN_V1.fm Page 16 Friday, February 3, 2012 7:59 AM www.dynexproducts.com (800) 305-2204 Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A. © 2012 BBY Solutions, Inc. All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
