Submittal Sheet

ManualsBrandsDynesic ManualsChemicals & CleanersPANSEAL Paste Grade All Purpose, Trowelable Repair Compound (1 Gallon Kit)

SELECTION & SPECIFIC DATA

Generic Type

Epoxy Paste/Caulk

Description

PANSEAL Paste Grade is a unique, multi-component,

novolac epoxy caulk designed for use as a chine repair or

lap weld feathering product for steel tanks. It is often used

in conjunction with chemical resistant topcoats such as

PANSEAL or DX-3300. PANSEAL Paste Grade has excellent

chemical resistance to a wide range of petrochemical

products, fuels, organic/inorganic acids & alkalis. It’s long

re-coat window allows it to be top-coated up to 14 Days,

depending on temperatures. PANSEAL Paste Grade is

comprised of 100% solids and contains no VOC’s.

PANSEAL Paste Grade’s excellent adhesion properties allow

it to bond to steel, concrete and iron even when coating

conditions are less than ideal. PANSEAL Paste Grade can

be used on a variety of substrates and applications. Typical

applications include leak repair, wastewater tanks, lift

stations, wet wells, manholes, storage tanks and cooling

tower repair, anchor adhesive, plate bonding, pump casting

and serves as a high strength structural adhesive for metal

bonding. PANSEAL Paste Grade is ideal for majorly

damaged surfaces, vertical applications and ceiling work

because of it’s thick viscosity. PANSEAL Paste Grade can

be sanded, drilled, tapped or machined.

Product Features & Benefits

• Immediately seals leaks, cracks on majorly damaged surfaces

• Thick viscosity - Ideal for vertical repairs and ceiling work

• Easy to apply with a trowel

• Bonds chemically and mechanically to substrate

• Works on metal, fiberglass, stainless steel, concrete and wood surfaces

• 100% solids and entirely free of solvents and volatile organic compounds

Recommended Uses

• Wastewater and Storage Tanks

• Cooling Tower Repair and Structural Metal/Concrete Repair

• Structural Adhesive for Metal Bonding

• Resurfacing Damaged Areas

Color/Part # Gray/2500PG

Finish Matte

Primer Self-priming

Solids Content By Volume 100%

Theoretical Coverage Rate 2 sq ft at 800 mils

Dry Time Dry Times (ASTM D1640), 25 – 30 mils DFT

Tack Free Time 3.5 hours at 25°C (77° F)

Dry Hard Time 8 hours at 25°C (77° F)

Container Size 1 gallon

Product Data

2500PG - PANSEAL Paste Grade

Summary of content (3 pages)

PAGE 1
Product Data 2500PG - PANSEAL Paste Grade SELECTION & SPECIFIC DATA Generic Type Epoxy Paste/Caulk Description PANSEAL Paste Grade is a unique, multi-component, novolac epoxy caulk designed for use as a chine repair or lap weld feathering product for steel tanks. It is often used in conjunction with chemical resistant topcoats such as PANSEAL or DX-3300. PANSEAL Paste Grade has excellent chemical resistance to a wide range of petrochemical products, fuels, organic/inorganic acids & alkalis.
PAGE 2
Product Data 2500PG - PANSEAL Paste Grade 2. SUBSTRATES & SURFACE PREPARATION General Surfaces must be clean and dry. Remove all dirt, dust, oil and all other contaminant. Steel Immersion: SSPC-SP10 Near White with jagged profile of 2.5 – 3.5 mils. Non-immersion: SSPC-SP6 1.5-3.0 mils SSPC-SP2 or SP3 are suitable cleaning methods for mild environments. Concrete or CMU Concrete must be cured 28 days at 75°F (24°C) and 50% relative humidity or equivalent.
PAGE 3
Product Data 2500PG - PANSEAL Paste Grade 3. Ventilation When used as a tank lining or in enclosed areas, thorough air circulation must be used during and after application until the coating is cured. User should test and monitor exposure levels to insure all personnel are below guidelines. PACKAGING, HANDLING & STORAGE Shelf Life Part A: 12 months at 75°F (24°C) Part B: 12 months at 75°F (24°C) * When kept at recommended storage conditions and in original unopened containers.