User`s manual

Network Camera User’s Guide
44/94
White Balance:
Auto: will adjust the white balance automatically.
Hold: will hold the white balance.
Exposure Control:
Auto: will adjust the internal gain automatically.
Hold: will hold the internal gain.
Maximum Exposure Time:
User can limit the maximum exposure time of the image sensor. The larger value means
longer exposure time possibly.
Color Level:
Large value will be colorful.
Brightness:
Large value will brighten camera.
Sharpness:
Large value will sharpen camera.
Contrast:
Large value will contrast camera heavily.
White-Light LED:
User can turn On, Off, Auto or Schedule of the built-in White-light LEDs. This function is
very useful under low illumination environment even 0 Lux.
In case the Auto mode is selected, user needs to specify 3 parameters in advance:
LED ON Threshold (0~10000): this value set the threshold to turn on white-light LED. It
should be lower or equal to LED OFF Threshold.
LED OFF Threshold (0~10000): this value set the threshold to turn off white-light LED. It
should be higher or equal to LED ON Threshold.
Delay Time: The delay time between LED ON/OFF switching.
Note that Current Value is the current luminance from the captured video. It’s a useful
reference to set LED ON/OFF Threshold.
De-Noise:
De-Noise can remove or lower unwanted noise and preserve fine details and edges.
Default Settings:
Restore to factory image settings.