User`s manual

Network Camera User’s Guide
41/94
In case the IP address is changed, system is able to send out an email to alert someone
if the function is enabled.
SMTP Notification (e-mail):
If enable this function, then the “Send to“ and “Subject” fields need to be filled.
Send To:
Type the receiver’s e-mail address. This address is used for reply mail.
Subject:
Type the subject/title of the E-mail.
TCP Notification:
If enable this function, then the “TCP Server“, “TCP Port”, and “Message” fields need to
be filled.
TCP Server:
Type the server name or the IP address of the TCP server.
TCP Port:
Set port number of TCP server.