User`s manual

Network Camera User’s Guide
36/94
If your device is connected to xDSL directly, you might need this feature. However, if
your device is behind a NAT router, you will not need to enable this feature because
your NAT router should take care of this job. As to xDSL environment, most of the users
will use dynamic IP addresses. If users want to set up a web or a FTP server, then the
Dynamic Domain Name Server is necessary.
DDNS:
To enable or disable the DDNS service here.
Server name:
Choose the built-in DDNS server.
DDNSHost:
The domain name is applied of this device.
User name:
The user name is used to log into DDNS.
Password:
The password is used to log into DDNS.
PPPoE
PPPoE: