User`s manual

Network Camera User’s Guide
32/94
This port is very useful for Intranet usage. The second HTTP port is changeable. Users
could assign the second port number of http protocol, and the WAN users should follow
the port number to login. If the http port is not assigned as 80, users have to add the port
number in back of IP address. For example: http://192.168.0.100:8080
.
Therefore, the user can access the device by either
http://xx.xx.xx.xx/
, or
http://xx.xx.xx.xx:xxxx/
to access the device.
If multiple devices are installed on the LAN and also required to be accessed from the
WAN, then the HTTP Port can be assigned as the virtual server port mapping to support
multiple devices.
Click “OK” to save and enable the setting.
Wireless
If your device is a wireless model, you could assign the related parameters into wireless
setting. Using a wired connection ensures greater secrecy while making these settings.
These settings should always be made in the camera first and secondly in the wireless
access point. This ensures that the device is always accessible when making changes.
Note that this function is only available for the model with WLAN capability.