Instruction Manual

32
For a typical karaoke system connect the high level
output of an audio source for the playback music
(CD player, computer, portable player etc.) using an
RCA cable with one of the inputs being “AUDIO
INPUT” or use the BT connection. Connect a dyna-
mic microphone to the microphone input socket
“MIC IN” on the front of the device. If the karaoke
mix is to be recorded, connect the recording output
“PRE OUT” to the high level input of a recording
device (tape, CD recorder etc.). The loudspeakers
must be connected, each with a loudspeaker cable,
to the two loudspeaker outputs “R” (right) and “L”
(left) in the connection area “TO SPEAKER”.
TYPICAL KARAOKE SYSTEM
E-SA18 MKBT_A6_quer_RZ_Okt.qxp_Layout 1 30.09.21 09:47 Seite 32