Instruction Manual

1. POWER

Switches the device on and off. When switched off,

the device is disconnected from the mains. The LED

located next to the switch lights up when the devi-

ce is switched on.

2. MIC INPUT

You can connect a dynamic microphone to this

6.3 mm jack socket. You must not attach a high

level source here under any circumstances!

3. MIC VOL

With this volume control you set how loud the

microphone signal is mixed to the input signals at

the “AUDIO INPUT” (9) connectors.

4. DIGITAL ECHO

With this dial you set the intensity of the echo

affecting only the microphone signal.

5. BASS

For setting the bass proportions (low frequencies)

of the sound.

6. TREBLE

For setting the treble proportions (high frequencies)

of the sound.

7. LOUDNESS

This button activates and deactivates a sound cor -

rection that adapts the speaker audio signal to the

human auditory sensation in the lower volume range.

8. BT/LINE

Source selector BT/LINE.

9. BT LED

Status LED for BT.

10. VOLUME

The volume of the loudspeakers may be increased

or decreased with this.

E-SA18 MKBT_A6_quer_RZ_Okt.qxp_Layout 1 30.09.21 09:47 Seite 29