Operation Manual

Reverse

If your car have an ORIGINAL PDC system installed or have an original rear view camera, you can re-

enable these depending on vehicle type.

This is NOT at all Vehicle types and construction

possible. Please refer to the compatibility

information from Dynavin.

None : When no system is installed

PDC : If only one PDC system is installed

CAM : If only a rear view camera is installed

PDC+CAM : When both systems are installed in the vehicle.

If you selected None and use than the reverse gear nothing happens, the screen remains in the

current menu.

If you have selected PDC and you take the reverse gear a new image appears.

Depending on the vehicle and vehicle system it is also possible that the front PDC information is

displayed.

Please note that this systems have only

a supporting role. Faulty measurements caused by not

properly built in systems or by environmental eﬀects caused interference can not be compensated by

the system.

These systems do not replace the personal control and the minimum clearances