icons
A2DP c 2
Warning do not open the case. Only open the case if you get the permission from the manual or an authorized technician. In contravention the warranty expired. Do not try to repair the unit yourself. If its needed to repair the unit use only our service partner. In contravention the warranty expired. Attention ! Do not overload the power cords or extension cables. Fire risk Attention! Do not use foreign objects and put them into the opening of the unit. Danger of short circuit and damaged board.
Product features The unit offers a variety of new uses. The new Dynavin developed by combination of multimedia device and the new operating system based on Microsoft © Windows, you have a number of new optical and technical properties. Operating system : DynOS – self programmed system from Dynavin CPU : 833 MHz Internal memory : 4 GB Multitouch TFT 6.
RED WHITE PARKING DATA_TX REAR ZONE OUT R REAR ZONE OUT L TV/DAB+ AUX IN VIDEO YELLOW YELLOW CAMERA BROWN REAR MONI TOR 1 AUX IN/R RED REAR MONI TOR 2 AUX IN/L WHITE YELLOW LINE OUT FRONT L WHITE BT MIC LINE OUT FRONT R RED FM/AM ANTENNA FAKRA PLUG LINE OUT REAR L WHITE A B A 7 8 5 6 A8, Ground Black A7, ACC Red A6, Illumination Orange A5, AUTO ANT & AMP CON Blue A4, +12V Yellow A3, Reverse detecting Green A2, CAN RX Brown A1, CAN TX Brown & Black 3 0.75A MAX 12V P.
RED PARKING DATA_TX REAR ZONE OUT R REAR ZONE OUT L TV/DAB+ CAMERA BROWN WHITE AUX IN VIDEO YELLOW REAR MONI TOR 2 AUX IN/R RED YELLOW AUX IN/L WHITE REAR MONI TOR 1 LINE OUT FRONT L WHITE YELLOW LINE OUT FRONT R RED FM/AM ANTENNA FAKRA PLUG LINE OUT REAR L WHITE MEDIA LINE OUT REAR R RED A B A 7 8 5 6 6 5 8 7 A8, Ground Black A7, ACC Red A6, Illumination Orange 0.
REAR ZONE OUT R DATA_TX WHITE RED PARKING REAR ZONE OUT L YELLOW TV/DAB+ AUX IN/L WHITE AUX IN VIDEO YELLOW CAMERA BROWN REAR MONI TOR 1 REAR MONI TOR 2 YELLOW LINE OUT FRONT R RED LINE OUT FRONT L WHITE BT MIC LINE OUT REAR L FM/AM ANTENNA FAKRA PLUG LINE OUT REAR R RED WHITE A B 7 8 5 6 ACTIVE 6 5 8 7 A8, Ground Black A7, ACC Red A6, Illumination Orange A5, AUTO ANT & AMP CON Blue P. CNTR 12V 0.
Buttons on the front panel and their meaning The keys given here are not to be found in view of all of Dynavin devices. This just gives you an overview of the keys and their functions in general. Therefore, pay attention in your specific product and which keys to this present.
First steps If you have connected the device as indicated, turn on the ignition of the vehicle. The multimedia device will then turn on the first time. This may take about 30 seconds. This takes you to the radio interface.
Operation of the touchscreen Most functions of the Dynavin device are controlled through the touch surface. This means that you should to ensure the most accurate possible control perform a calibration of the screen. To facilitate the operation, some functions and actions you can perform on the screen shown with symbols in the instructions. Touch the screen (short) Touch the screen (long) Press and hold and move As on a smartphone you can move the surfaces.
If you feel that the screen does not respond accurately to your commands, you can perform on the menu a screen calibration again. To do this press as indicated in the image a sequence 1-5 and following the cross as central as position in the circle. Once you have selected the last point you will automatically return to the setup menu.
System settings In the system settings you can now make even some of the basic options and settings of the device. Through a brief touch of the box next to the words, the option will be Enable. A hook indicates that the option is selected Brake So that you are not distracted during the journey, the playback from movies or DVB-T will be inhibited. You get when you release the handbrake an information image that this is not allowed while traveling.
Brightness You have several ways to adjust the brightness and control. This includes also the dimming function Touch first the down arrow key right of the menu item Auto / Manual After touching the arrow there will be open the sub-menu. Depending on the selected function will be another option in the settings unlocked.
Navi Media Info If you have enabled this option will be displayed in navigation mode in an additional shot. You can display a variety of media: Radio, iPod, USB, Aux and so on If you need the full navigation screen, you can also reduce the displayed image by pressing the button in the picture. To represent this again press the button again. Dual Zone If you have enabled the option is displayed on the navigation Monitor and played back a movie in the passenger area.
Reverse If your car have an ORIGINAL PDC system installed or have an original rear view camera, you can reenable these depending on vehicle type. This is NOT at all Vehicle types and construction possible. Please refer to the compatibility information from Dynavin. None : When no system is installed PDC : If only one PDC system is installed CAM : If only a rear view camera is installed PDC+CAM : When both systems are installed in the vehicle.
Have you selected CAM is transmitted the image of the rear view camera. Please note that during the transmission of the image by settings of the camera and by the installation of angle or externally caused interference visibility may be disturb. These systems do not replace the personal control and the minimum clearances. When activated PDC + CAM both information will be displayed in one screen.
For more functions move the menu bar to the bottom. The easiest way you can do this with reach the scroll bar on the right side of the screen. Time Zone In this menu item you can set the time zone in which you are located. Touch Screen Adjust If you feel that the screen does not respond accurately to your commands, you can perform on the menu a screen calibration again. To do this press as indicated in the image a sequence 1-5 and following the cross as central as position in the circle.
Main menu The device features for common across different levels (pages). The main menu is divided into three sites. You can move the window on a slide motion. Touch the screen with a finger and then move it to the right or to the left. This moves you to the individual pages of the main menu. . You can do this in almost every menu on the same way The three points on the lower side of the display shows you which side is open and to which direction you can move.
Change icons To move a function icon proceed as follows. You have the option to change two of the options from the first page by functions of the last (third) menu page. In the left picture you see the interchangeable functions are Highlighted. Go through a scrolling movement to the third menu page. Touch and hold to the function you want to move with a finger. After the first two seconds, the icon for the selected function is caused and you will automatically be on the first menu page.
Radio function To get to the radio function, press in the Main Menu the radio icon, or use the radio button on the front of the device. Overview of buttons = Manual tuning = Station keys 1-15 By scrolling to the left or right to access all presets.
Radio -Options – Radio options Through a brief touch the box next to the words the option is Enable. A hook AF indicates that the option is selected = Alternative frequency When choose it, will appear AF characters on the top of the radio menu. this allows a receiver to transform a different frequency providing the same station when the first signal becomes too weak.
CD/DVD function To access the CD / DVD feature, insert a disk into the drive, or if already a medium is in the drive, press the button labeled disc on the front of the device or from the main menu via the touch screen. By touching the icon Disk After you insert the disc the playback of the music or movie will start automatically. To eject the CD again press the front panel button to eject the medium.
CD/DVD movie playback By a slight pressure on the touch screen, you can call the functions listed below. Previous : track Next : track : Play / Pause : Without function : Back to main menu : More Features This additional button opens provides you more control options to control the movie.
Phone function To access the Phone function, press on the touch panel displayed option or press and release the right knob. In order to use the phone or Bluetooth function, connect first your phone to your Dynavin unit. Enable the BT option on your phone and search for any nearby devices. If your phone has finished the search, you should see the display Dynavin-N6. Pair the phone with the device. Once your cell phone or smartphone connected to the Dynavin unit, this is displayed in the menu.
Buttons function in phone menu By a slight pressure on the touch screen, you can call the functions listed below. C : Delete input Each time you press the button, the last digit is the deleted entered numbers : Call History Here are the most recent incoming and outgoing calls appropriate : Phonebook Here are all the entries from the phonebook of your mobile phone displayed. When they were transferred. : Answering a call Accept incoming calls or call the selected numbers.
Call History : Call History Here are the most recent incoming and outgoing calls appropriate By scrolling movement to the left or right, you can call all contacts displayed. With a short press on the icons you can select the following.
Phonebook : Phonebook All entries from the phone book of your phone are displayed. When they were transferred from the mobile phone. When you call the phone book option it will take you directly to the search mode. By briefly pressing the function keys, you can select the following.
Contact from the phonebook You can now access the following functions on the three buttons below the contact. : Call contact : Select another phone number that is stored under the contact Depending on how many numbers you have assigned to a contact You can select this button, the stored numbers : Save to favorites At this moment, this contact is also guided to your favorites. If you connect a different phone with the Dynavin unit, the in-memory contacts are overwritten.
iPod function To access the iPod function, briefly press the touch screen and iPod ® option or press and release the push button on the front of the Dynavin device is labeled with iPod. You can only enter the menu if you have also connected an iPod to the unit via USB. Use only USB to iPod® cable were also given by Apple® free to use. Otherwise, it may result in malfunction or your iPod® is not recognized by the device.
Functions of the iPOD® menu With a short press on the buttons you can select the following. : Previous track : Next track : Play / Pause : Repeat Press one´s - The song is repeated once Press twice - The song is repeated at constant. The symbol for repetition is in the upper line displayed as confirming the selection. : Shuffle In this setting, the songs are purely coincidental from the folder played where you are. The symbol for Shuffle is in the upper line displayed as confirming the selection.
Display symbol for Repeat Display symbol for Shuffle 33
iPod options menu With a short press on the buttons you can select the following. With an up and down scroll motion, you can search the songs, artists,or playlists in the displayed . table : Open the iPod® album menu : Open the iPod® artist menu : Open the iPod® song menu : Open the iPod® playlist menu : Opens the Input menu to search Opens the search window with a virtual keyboard.
Menu for the albums If you have opened the menu for the Albums you will see all albums which are stored like the picture above. A short press on the name of an album opens this and all the songs stored in the album are displayed. With a further pressure on one of the saved songs will be selected and played.. With an up and down motion, you can browse the songs or albums in the table which is displayed to you. If you want to browse the contents of the folder, use the search function in the menu.
Menu for the artists If you will open the menu for the performers all stored artist with name will be displayed to you. A short press on the name of an artist opens up new window with either all albums of the artist or the stored songs when no album has been deposited With a further pressure on one of the saved songs will be selected or start to play. With an up and down motion, you can browse the songs or artists or albums in the table which is displayed to you.
Menu for playlists If you have opened the menu for the playlists you will see all of them like the picture above A short press on the name of a playlist will open this and all the songs stored in the album are displayed. With an up and down motion, you can browse the songs or artists or albums in the table which is displayed to you. If you want to browse the contents of the folder, use the search function in the menu. By pressing the keyboard icon, the virtual input option will be shown.
Menu for the songs If you will open the menu for the songs all stored songs with title will be displayed to you A short press on the title of a song that is shown to you will start playing the song. An icon to the left side of the song title will show you what song is currently playing With an up and down motion, you can browse the songs in the table which is displayed to you. If you want to browse the contents of the folder, use the search function in the menu.
USB function To access the USB function press on the touch screen, this option or press the push button on the front of the Dynavin device that is labeled USB. You can only enter the menu when you used to connect a USB device to the device via USB. Use only USB media formatted with FAT16/32. Otherwise it can happen that the unit can not be read in the media. The connected USB media should not exceed a maximum of 64 GB. After pressing the USB button the USB menu is invoked and the content will be loaded.
Functions in USB mode With a short press on the buttons you can select the following. : Previous track : Next track : Play / Break : Repeat Press one´s - The song is repeated once Press twice - The song is repeated at constant. The symbol for repetition is in the upper line displayed as confirming the selection. : Shuffle In this setting, the songs are purely coincidental from the folder played where you are. The symbol for Shuffle is in the upper line displayed as confirming the selection.
USB Options With a short press on the buttons you can select the following. With an up and down scroll motion, you can search the songs, artists, or playlists in the displayed table. . : Opens all music information on the USB media : Opens all movie files on the USB media : Opens all image formations on the USB media : Opens all the information of the USB stick in a directory structure : Opens the Input menu to search Opens the search window with a virtual keyboard.
Menu for the albums If you have opened the menu for the Albums you will see all albums which are stored like the picture above. A short press on the name of an album opens this and all the songs stored in the album are displayed. With a further pressure on one of the saved songs will be selected and played. With an up and down motion, you can browse the albums in the table which is displayed to you. If you want to browse the contents of the folder, use the search function in the menu.
Menu for the artists If you will open the menu for the performers all stored artist with name will be displayed to you A short press on the name of an artist opens up new window with either all albums of the artist or the stored songs when no album has been deposited With a further pressure on one of the saved songs will this be selected or start to play. With an up and down motion, you can browse artists in the table which is displayed to you.
Menu for the songs If you will open the menu for the songs all stored songs with title will be displayed to you. Back to previous menu A short press on the title of a song that is shown to you will start playing the song. An icon to the left side of the song title will show you what song is currently playing With an up and down motion, you can browse the songs in the table which is displayed to you. If you want to browse the contents of the folder, use the search function in the menu.
The menu for movie playback A short press on the title of a movie will start playing it. With an up and down motion, you can scroll the list of films in the table which is displayed. With a short press on the buttons you can select the following.
The menu to view images A short press on one of the pictures this is in large format will be shown. With an up and down motion, you can scroll through the pictures in the displayed table. You can save images which are saved on the SD-Card or USB device in the initial screen. These are then displayed when the Dynavin unit starting up. You can use any kind of picture you have stored on the card like JPG, PNG or BMP files. To do this, press on the icon in the bottom left corner.
That your chosen image is saved as the startup screen, will be confirmed by the green icon in the bottom left corner. If you want to delete this again, press again the memory button in the image. For confirmation, you will instead of a green symbol, a red appears when the image was deleted as the start screen.
The menu for the folder structure With an up and down motion, you can scroll the directories in the Browse in the displayed table. If you select a folder, you can go to the other sub-directories and then access the desired content. If you touch the keyboard icon, you can open the search function. By typing on the keyboard, you can search for specific files and folders.
SD-Card To access the SD card function, an SD card in the MMC slot on the front panel must be plugged. The card can have a storage capacity of up to 64GB. With a short press on the buttons you can select the following. With an up and down scroll motion, you can search the songs, artists, or playlists in the displayed table.
Menu for the Albums If you have opened the menu for the Albums you will see all albums which are stored like the picture above. A short press on the name of an album opens this and all the songs stored in the album are displayed. With a further pressure on one of the saved songs will be selected and played. With an up and down motion, you can browse the songs or albums in the table which is displayed to you If you want to browse the contents of the folder, use the search function in the menu.
Menu for the Artists If you will open the menu for the performers all stored artist with name will be displayed to you. A short press on the name of an artist opens up new window with either all albums of the artist or the stored songs when no album has been deposited With a further pressure on one of the saved songs will be selected or start to play With an up and down motion, you can browse the songs or albums in the table which is displayed to you.
Menu for the songs If you will open the menu for the songs all stored songs with title will be displayed to you. A short press on the title of a song that is shown to you will start playing the song. An icon to the left side of the song title will show you what song is currently playing With an up and down motion, you can browse the songs in the table which is displayed to you If you want to browse the contents of the folder, use the search function in the menu.
A2DP Bluetooth function To use the A2DP function you need to have your phone connected to the device and the mobile phone must support A2DP function. In the main menu scroll to the page with the source options. Select the icon for A2DP and apply it by a short pressure on the menu field.
Aux Function If you attach an external audio source, you can control this only on the connected device. A control device on the Dynavin is not possible. To do this, use an adapter to the RCA connectors to the backwards inputs. In the main menu scroll to the page with the source options. Select the icon for HDD and apply it by a short pressure on the menu field : Back to main menu Or, briefly press the SRC button on the front of the Dynavin-Unit.
Internal memory The Dynavin unit has an internal memory where you can store media such as music, pictures or movies. In the main menu scroll to the page with the source options. Select the icon for HDD and apply it by a short pressure on the menu field With an up and down scroll motion, you can search the songs, artists,or playlists in the displayed table.
Menu for the Albums If you have opened the menu for the Albums you will see all albums which are stored like the picture above. A short press on the name of an album opens this and all the songs stored in the album are displayed. With a further pressure on one of the saved songs will be selected and played. With an up and down motion, you can browse the songs or albums in the table which is displayed to you. If you want to browse the contents of the folder, use the search function in the menu.
Menu for the Artists If you will open the menu for the performers all stored artist with name will be displayed to you. A short press on the name of an artist opens up new window with either all albums of the artist or the stored songs when no album has been deposited With a further pressure on one of the saved songs will this be selected or start to play.’ With an up and down motion, you can browse the songs or albums in the table which is displayed to you.
Menu for the songs If you will open the menu for the songs all stored songs with title will be displayed to you A short press on the title of a song that is shown to you will start playing the song. An icon to the left side of the song title will show you what song is currently playing With an up and down motion, you can browse the songs in the table which is displayed to you. If you want to browse the contents of the folder, use the search function in the menu.
Folder options The option is used to copy or to transfer files from storage media to the internal memory. You can copy the files only from an SD card which is inserted in the MMC slot into the internal memory. Touch the button Storage Card. You get a list of all files on the card. These are displayed in a folder structure. Like a PC, you can now select files and by the shown keyboard shortcuts you can copy, past, or delete files.
Function of the Menu Ctrl+C : Copy file Ctrl+V : Paste file Ctrl+A : Choose all files : Delete selected file : Back to previous menu : Back to main menu Copying files to the internal memory Select a file that you would like to copy to the internal memory. The file is marked as shown above. If you want you can also select multiple files. Simply tap to another file. Now press Ctrl+C Button then copies the files you want to transfer. Now press the Back key until you are in the main menu.
Navigation To use the Navigation there must be inserted the SD-Card with the software on it to the Navi-Slot on the front of the navigation system. It can be used almost any Windows-based navigation on it. Normally Dynavin will preinstall the IGOPrimo Navigation software and all settings are done already. If you want to use your own software now or the enclosed from Dynavin SW can not be run, check first of the following settings.
The path of the file should be shown like in the image as a specified path now. Press these button and return back to the previous menu. Start up the Navigation software Now go to the main menu, click the icon for navigation. You will see when you start the navigation first a loading screen is shown. When you start the navigation the first time, this may take several minutes to complete. Also you must set for the first time some options of the Navigation software like language time voice and so on.
Sound Settings The Dynavin N6 offers a wide range of Settings to adjust the sound conditions at your requirements. This includes the possibility to set the delay times on the seating position and also the possibility to activate an original active sound system such as BMW with DSP system. Please read on the homepage of Dynavin in which vehicle which sound system can be activated Through a brief touch of the lettering the option is selected.
Fader – Balance – Delay In the menu for fader, balance and delay you can set up the speakers so that they are leveled perfectly to your position. Through a brief touch of the arrow representations option will select and change the specified value. When you press a long time on one of the settings, the setting shifts continue automatically. Use the directional pad displayed on the right side to control the volume of individual speakers. The arrows indicate the direction in which you move the center.
Bass – Middle – Treble In this menu you can adjust the highs and lows of your sound system. With the four controls you have shown the possibility by simply moving the bass, high and mediumsound and when you have also connected a subwoofer you can control the subwoofer output. With an up and down motion scrolling, you can get the scrollbar to the desired position. To do this, press the scroll bar. If the blue bar turns red you know that the controller is selected.
Equalizer In this menu you have the opportunity to set one frequency in a certain range. You can do in five different frequency ranges. But you have also the possibility to select some preset values. How, for example, Flat, Pop, Classic, rock, or if you can select the User button to make your own personal setting. With an up and down motion scrolling, you can get the scrollbar to the desired position. To do this, press the scroll bar. If the blue bar turns red you know that the controller is selected.
Source In this menu you can set whether the volume level of an audio source when switching the source it´s automatically adjusted. If the controller is in the 0 position the volume that is set by the volume control will be assumed. In the areas above or below 0 the volume is automatically adjusted by this value. With an up and down motion scrolling, you can get the scrollbar to the desired position. To do this, press the scroll bar. If the blue bar turns red you know that the controller is selected.
Other settings Confirmation tone : With this option you can set the key confirmation sound. With the shown controller you can set the volume of the sound. Touch the scroll bar for this function. Warning &PDC : This option is just for special cars like BMW E9X and E8X. If you select this option you can hear warning signal through the speakers. The warning beep includes seat belt and so on.
DAB The New Dynavin unit will enable you to connect with other accessories. Therefore Dynavin has a DAB tuner in preparation that allows you to upgrade your multimedia device with an external tuner that is developed by Dynavin itself. You can connect it external to the Unit. This combination allows you to receive and control of the multimedia unit Digital television. Please inform yourself on the homepage of Dynavin when this is available. www.dynavin.
OBC The Dynavin unit provides you with the option to display some of vehicle internal car information. The information displayed depending upon manufacturers, vehicle, year and on the software version of the vehicle. This information may therefore be different from vehicle to vehicle. On the possibilities to read out the car information Dynavin have only a limited impact and can not be referred in detail before the installation of the unit is done.
Time synchronization ( except MC 2000) This function may only be used in Mercedes vehicle. Dynavin offers you the opportunity by removing the original Mercedes navigation device to match the time of the on board clock with the new device. Only If you have connected the unit through a car which is supported you will find this option in the menu. To press through a short touch on the display the Clock Sync option in the main menu will be activated.
Update your unit You can find some System information of the unit and the possibility to make an update of the unit. Here you can see, for example, the version of the operating system or serial number or even how much internal memory you have left to use. If it is necessary to install any update, you can do this in this menu. Note : If your device is functioning normal or you should not be explicitly informed on the homepage of Dynavin to update the unit, you don´t need to use this feature.
Download on our homepage the permissible update software for your device and save them on an SD-Card. The card must be formatted with the FAT 16/31 file system. Then insert the card into the MMC SD card slot. Now click the on the Upgrade now box. If no update software or a non-extracted file is located on the SD card, you will get a note that you have to download the software from the Dynavin website. Only when the system find the correct files on the card continued.
Supported Video files : MPEG: *.mpg, *.mpeg, *.dat, *.vob AVI: *.avi, *.xvid RM: *rm, *rmvb FLV , ASF/ WMV MP4: *.mp4, *.mov MKV , OGM Supported image files : JPEG, PNG, GIF FAQ / Troubleshooting If you encounter during installation or in the operating of the device to not mentioned settings or problems, Ask us personally or look on our website under the FAQ's or the Trouble shooting information. These can be found on our homepage: www.dynavin.
