Operation Manual

4. Tap

5. There is one Default Lorry profile at the end of the list. You can either:

• tap the

button at the Default Lorry profile or

• create a new profile by tapping

then

and selecting Lorry as the vehicle type.

6. The list of vehicle profile parameters appear. Scroll the list and tap any of the lines to

change the parameters. The parameters are intuitive. In addition, you have the

following options:

•

: When enabled, the list of vehicle parameters always

appears before route calculation. This helps you quickly adjust the parameters

when some of them (the actual weight for instance) often change.

•

: When selecting lorry as the vehicle type, U-turns are

disabled from routes as much as possible. With this button you can even forbid

turning back on divided roads.

7. When finished with the vehicle parameters:

• tap

if you have modified an existing vehicle profile or

• tap

if you have created a new profile.

While this profile is selected, the parameters of your vehicle are taken into account when

planning routes. Note that this leads to a safe route for your lorry only if map data contains the

weight, height, etc. restrictions of the road network in your area.