Operation Manual

63
3.1.10 Navigate to a location stored in a photo
You can also set the location stored in a photo as your destination. Do as follows:
1. In the More menu, tap
.
2. The photos stored in the device appear. Select one photo to set its location as the
destination.
3. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
) appears at the
new location. Tap
to confirm the destination, or tap
to select a different destination.
4. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
parameters, or tap
and start your journey.
Note!
Only geotagged JPG files contain location information. That is why these kind of
files can only be used in navigation. Other picture files do not appear in the list.
Files must be located on an inserted SD card, either in the root folder or in a
"pictures" folder.