Operation Manual

34
6. After entering a few characters, tap
to open the list of intersections that match
the text already entered. Scroll down the list if necessary and then select one of the
streets from the list.
7. The list of intersecting streets appears. Select one street to define the intersection. As
usual, you can tap
to enter a few characters and narrow the list.
8. Once the destination is selected, a full screen map appears with the selected point in
the middle. If necessary, tap the map somewhere else to modify the destination. The
Cursor (
) appears at the new location. Tap to confirm the
destination, or tap
to select a different destination.
9. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
parameters, or tap
and start your journey.
Note!
The alternative way to search for an intersection is to place the
button in
the customisable Quick menu (you can do it in Settings). Access this feature
from the Quick menu and select
. Enter a few characters
from the name of one or both intersecting street and tap
.
The rest of the procedure is similar to the above.
3.1.1.5 Combined Search - Navigating to a Place of Interest
To find a Place of Interest in Combined Search, carry out the search as described earlier.
Search for a part of its name. When you get to the result screen, do as follows:
1. Tap
at the top of the screen.
2. The list is now filtered. What you see is the list of matching Places ordered by their
distance from your current location.
3. (optional) Should your product contain Places from different data providers, you can
further narrow the list by showing Places from one provider only. Look for the provider
logos at the top of the screen. Tap one of them to see Places from that provider only.