Operation Manual

19
Tap any of them to display the exit area on the map. You can now easily add this exit as a
waypoint to your route if needed.
If you want to display other types of Places for the exits, you can change the icons in Visual
Guidance settings (page 110).
2.3.3.6 3D object types
iGO primo supports the following 3D object types:
Type Description
3D terrain 3D terrain map data shows changes in terrain, elevations or depressions in
the land when you view the map in 2D, and use it to plot the route map in
3D when you navigate. Hills and mountains are shown in the background of
the 3D map, and illustrated by colour and shading on the 2D map.
Elevated roads
Complex intersections and vertically isolated roads (such as overpasses or
bridges) are displayed in 3D.
3D landmarks
Landmarks are 3D artistic or block representations of prominent or well-
known objects.
3D buildings
3D block representation of full city building data containing actual building
size and position on the map.
2.3.3.7 Elements of the active route
iGO primo shows the route in the following way:
Symbol Name Description
Current GPS position and
Start point
Your current position displayed on the map.
• In pedestrian mode it is the exact GPS
position.
• If a vehicle is selected for route calculation
and roads are near, the symbol is snapped
onto the nearest road.
Normally if GPS position is available, the route
starts from the current position. If there is no valid
GPS position, iGO primo uses the last known
position as the start point.
Waypoint (intermediate
destination)
An intermediate destination of the route before
reaching the final destination.
Destination (end point) The final destination of the route.
Route colour
The route always stands out with its colour on the
map, both in daytime and in night colour mode.