Manual

(December/3/2001)

6. Bias adjustment

For adjusting the antiskating force, make sure

that the dial indication of the antiskate dial

should coincide with the playing weight value.

But in some case due to the recording

condition or stylus shape, you are required

and allowed to readjust to the other dial

indication to obtain the better result.

All adjustments and setting up are now completed,

Your DV507 arm is designed to be maintenance

free. It will give long and reliable service but should

be treated with care and kept in a dust free

condition.

Should the arm require an overhaul or if you need

any other quations or spare parts for your DV507

please contact your dealer or Dynavector

distributor.

6. Specifications

System Bi-axls inertia controlled dynamic and eddy current damping

dynamic balance type tone arm

Total length 306mm (including headshell)

Effective length 241mm

Overhang 15mm

Offset angle 21.5 degree

Height 59mm (liftable up to 92mm )

Depth 36mm (without connecting cable )

Height adjustability 39-72mm (at sub arm center)

Optimum cartridge weight 15 - 35grms ( including headshell)

Tracklng force adjustability 0 - 3grams by 0.2grams step

Lateral tracking angle error -1.1 degree to +2.2 degree

(0 degree at inner band of record disk, 2.2 degree at outside)

Motion sensitivity Lateral -- less than 50 mgrams

Vertical -- less than 40 mgrams

Net weight 1,380 grams

Output connector 5P connector with low resistance cord 0.025 ohms/m, 50pF/m

Head connector: EIA standards

Head shell Aluminum diced and milled (weight 15grams)l