Specifications

Dynaudio Sapphire 3
Accessories
Accessories
Following accessories are contained in the scope of delivery:
8 x Spikes (optional use)
8 x Damping Feet (optional use)
2 x Cloth grilles, black (detachable)
2 x Damping pads for bass reflex port (optional use)
1 pair white gloves
1 dust cloth
Connecting
Connecting the loudspeakers
1. Connect a two-pole (+/-) loudspeaker cable to the binding posts, located at rear of the
cabinet (see Fig. 1). The high quality, gold plated binding posts can accommodate
different connection systems:
4.0 mm banana plugs: The pins can be put directly into the binding post without
any tightening necessary.
Cable spades: Untighten the binding posts, insert the spade into the opening, and
secure the spade by tightening the posts.
Bare wires: Untighten the binding posts and place the cable into the binding posts.
Tighten the posts.
Fig. 1 Binding posts at rear of cabinet.
Sapphire.book Seite 3 Dienstag, 4. September 2007 1:41 13