User's Manual

7
2.4 Connecting to Dynaudio Music speakers.
Wi-Fi and Bluetooth Connections
In order to play music streams from Apple Airplay, Spotify
®
, internet
radio or network storage, your Dynaudio Music speaker requires
connection to a home Wi-Fi network. Similarly, in order to play audio
streams via Bluetooth your speaker must be paired with one or more
Bluetooth audio source devices. Wi-Fi and Bluetooth connection is
described in the following paragraphs.
Before you begin connecting your Dynaudio Music speaker to Wi-Fi
or Bluetooth, please download and install the Dynaudio Music app on
your iOS or Android device if you have not already done so.
If your Dynaudio Music speaker is brand new and unused it will initially
switch on in both Wi-Fi setup and Bluetooth pairing modes ready to
be connected to your Wi-Fi network or be paired with a Bluetooth
device. Wi-Fi Setup and Bluetooth Pairing modes are indicated by the
Wi-Fi and Bluetooth indicators ashing.
Note: Your speaker will automatically leave Wi-Fi Setup mode after 10
minutes of inactivity and leave Bluetooth Pairing mode after two minutes
of inactivity.
If your speaker has been previously used and does not switch on
in Wi-Fi Setup or Bluetooth Pairing modes they can be selected as
follows:
Music 1 and Music 3
Wi-Fi Setup Mode: Press the Source button repeatedly until the Wi-
Fi ( ) indicator illuminates. Now press and hold the Source button.
The Wi-Fi indicator will ash to indicate Wi-Fi Setup mode.
Bluetooth Pairing Mode: Press the Source button repeatedly
until the Bluetooth ( ) indicator illuminates. Now press and hold the
Source button. The Bluetooth indicator will ash to indicate Bluetooth
Pairing mode.
Music 5 and Music 7
Wi-Fi Setup Mode: Press and hold Source button 1 ( ). The
button indicator will ash to indicate Wi-Fi Setup mode.
Bluetooth Pairing Mode: Press and hold Source Button 2 ( ). The
button indicator will ash to indicate Bluetooth Pairing mode.
Note: If your speaker has been previously connected to an alternative
network or Bluetooth devices it can be returned to its default settings
using the pin-hole reset button located near the power socket on each
speaker. Use a straightened paper-clip to press and hold the reset
button for one second. The indicator array will ash while the reset
routine is underway. When the reset is complete the speaker will restart
in Wi-Fi Setup and Bluetooth Pairing mode.
Wi-Fi Setup
With your Dynaudio Music speaker in Wi-Fi Setup mode, launch the
Dynaudio Music app. Tap Add New Speaker to begin the process
of connecting the new speaker to your Wi-Fi network. The app will
search for new Dynaudio Music speakers and display any found. Tap
to select the desired speaker. The app will then initiate the procedure
built into the mobile device operating system for connecting new
devices to its Wi-Fi network. Follow the on-screen instructions. When
successfully connected to the network, the speaker will leave Wi-Fi
Setup mode and be available to play network streams.
Bluetooth Pairing
With your Dynaudio Music speaker in Bluetooth Pairing mode, open
the mobile device Bluetooth setup page and ensure that Bluetooth is
enabled. Select the Dynaudio Music speaker from the list of available
unconnected devices to initiate pairing. Your Dynaudio Music speaker
will be shown as connected once pairing is complete and will be
available for Bluetooth audio streaming.
Note: Your speaker can be simultaneously paired with up to eight
Bluetooth devices, however it can only be connected to one at a time. If
a new Bluetooth device connects any existing connected device will be
disconnected and if a ninth device is paired, the rst paired device will be
‘forgotten’.