User's Manual

10
4. In Use
Your Dynaudio Music speaker can be operated and controlled from
its on-body buttons, the remote control handset or entirely via the
Dynaudio Music app.
4.1 On-body Buttons
The following paragraphs describe the on-body buttons for each
Dynaudio Music speaker model.
Music 1 and Music 3
Standby: Press and hold (1 sec) the standby button to switch your
Music 1 on or off.
Volume +/–: Press and hold the + or – buttons respectively to raise or
lower the volume. Volume level is indicated by the indicator array on
the top panel.
Playback ( ): Press the play/pause ( ) button to play or stop
playback. Press the next ( ) or previous ( ) buttons respectively to
play the next or previous track.
Note: With Wired audio sources (Aux, Opt) play/pause ( ) commands
will function as un-mute/mute operations. Wired sources are also unable
to respond to next ( ) and previous ( ) commands.
Source ( ): Press to scroll though the available sources. Only active
sources will be available for selection.
Note: Network streamed and Bluetooth audio can only be selected and
played from the Dynaudio Music app and will take priority over locally
selected sources.
Music 5 and Music 7
Volume +/–: Press and hold the + or – buttons respectively to raise or
lower the volume. Volume level is indicated by the indicator array on
the top panel.
Playback ( ): Press the play/pause ( ) button to play or stop
playback. Press the next ( ) or previous ( ) buttons respectively to
play the next or previous track.
Note: With Wired audio sources (Aux, Opt, HDMI) play/pause ( )
commands will function as un-mute/mute operations. Wired sources are
also unable to respond to next ( ) and previous ( ) commands.
Source 1 to 5: Press buttons one to ve to select favourite items
assigned in the Dynaudio Music app to each one. Alternatively, press
and hold buttons two, three, four and ve to select the HDMI,
Optical, USB and Auxiliary sources (no HDMI on Music 5) respectively.
Note: If no favourites are assigned to any buttons a single press, rather
than press and hold, will select sources.
Bluetooth ( ): Press the Bluetooth button to connect and play a
Bluetooth stream from a connected and active device.