Specifications

14 Dynaudio Owners Manual
Installation
7. Make sure that the amplifier power is switched off.
Connect the speaker terminal to the amplifier.
8. Put the foam on the rear side of the woofer in its correct position.
9. Position the baffle with top first. Make sure not to jam or damage the speaker wire.
10. To lock the speaker unit into position tighten the screws, which you have unscrewed
at the beginning (see step 2).
11. Insert the grille by pressing it carefully into the gap between the frame and baffle. Do
not press in the middle of the grille.
Congratulations. Installation is complete.
Installing IW 17
To install the IW 17, perform the previously described steps in following order:
 Step 7
 Step 8
 Step 5
 Step 6
 Step 11
Congratulations. Installation is complete.