Specifications

10 Dynaudio Owners Manual

Installation

Checking the installation point

Installing IW 17, IP 17 and IP 24

A pre-construction bracket is available to better facilitate new construction installations of

the Dynaudio IP loudspeakers, by working both as a template as well as a structural

support for the installation. The bracket serves as a guide to the dry wall/sheet rock

installer in order to help them ensure that the loudspeaker cut-out openings are in the

desired location upon completion of the dry wall installation. The stamped steel bracket is

designed to fit between standard width studs in order to accommodate the proper cutout

for the loudspeaker opening. For availability please check with your local Dynaudio

dealer.

WARNING

Pipe work, air conditioning, power cabling

Damaging existing in-wall installations may cause severe injury or death.

 Before producing the wall or ceiling cut-out, be sure that no conflict with other in-wall

installations will occur (pipe work, air conditioning, power cabling, etc.). In existing

(retrofit) construction applications, use a stud-finding tool to map the wall construction

accurately, a pipe detector to scan the proposed installation position and an electrical

field detector to help avoid any risk of electrical damage or shock.

 Dynaudio strictly recommends asking a professional for help.