User Manual

Introduction
6 BM5mkIII
Operation
Owner’s manual 7
Operation Overview – rear panel
Correct setup and connections is essential
to achieve optimal performance from your
monitors. Please follow the instructions on
the following pages.
AC 100-240V ~ 50/60Hz 60W
3
8
5
7
1
2
6
4
1. Power On/Off switch
2. AC power Input
3. Balanced analog input (XLR)
4. Unbalanced analog input (RCA)
5. Power Mode switch
6. Remote
7. Filter switches
– High Pass
– LF – Low lter setting
– MF – Mid lter setting
– HF – Hi lter setting
8. Level – Sensitivity switch
Introduction
Congratulations on your purchase of the
Dynaudio Professional BM5 mkIII active
monitor system. With the right care and at-
tention it will provide many years of excel-
lent and trouble-free audio reproduction. It
is most important, however, that you take
a few minutes at this early stage of your
monitor’s life to read this manual. It con-
tains essential information to help you get
the best from your new monitors.
The latest revision of this manual is always
available on our website:
dynaudio.com
For support, please refer to:
dynaudio.com/support/
Please enjoy!
Break-in time
The transducers of your Dynaudio Profes-
sional BM5mkIII will achieve better sound
quality after breaking in, especially after
the rst hours of use you may notice a sig-
nicant advance in sound quality, and fur-
ther subtle improvements in subsequent
hours of use.