User Manual

HF
This switch controls the Treble level and it is used to match the high end of the monitor to your other electr
HP
This switch sets the lower cut-off frequency of the monitor. It is used to match the monitor to a subwoofer.
8. Level trim
Use this switch to match the sensitivity of the BM5 mkIII monitor to your source.
High-output Source
If your source has a high output, set switch to the -10 position to reduce sensitivity by 10 dB.
Low-output source
If your source has a low output, set switch to the +4 position to gain 4 dB more sensitivity.
Protection
The BM5 mkIII monitor has several built in protection systems to reduce the risk of hazard or damage due
Both power amplifiers have thermal protection. This activates if a problem should occur, and helps protect
The woofer channel has a built in limiter that protects the woofer unit from too much excursion. It works by
Positioning
The BM5 mkIII is designed as a precision near-field monitor and can be equally well used in both stereo an
It can be placed on stands or on the meter bridge of a console provided that the meter bridge is sufficiently