Specifications
Presets
Dynaudio Professional AIR reference manual – 2014-08-28 87
Preset level in dB Gain
in dB
Preset no. Preset name Preset description L C R Ls Rs Sub LFE X-Over
(Hz)
X-Curve 1
*
X-Curve 2
**
1-15 Empty / User Presets 1 to 15 are “empty” until you choose to store something,
after which the respective preset name is “User Preset”.
Presets can be named using AIR Control software.
16 Neutral All parameters neutral – a good starting point 0 0 0 0 0 0 0 Off Off Off
17 BassMgt 50Hz Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1 0 0 0 0 0 0 0 50 Off Off
18 BassMgt 80Hz Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1 0 0 0 0 0 0 0 80 Off Off
19 BassMgt Ex50Hz Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1 0 0 0 0 0 0 0 50 Off Off
20 BassMgt Ex80Hz Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1 0 0 0 0 0 0 0 80 Off Off
21 BassMgt THXSim Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1 0 0 0 0 0 0 0 115 Off Off
22 BassMgt SC120 Music, video and post for domestic (not Cinema) use – Stereo, 5.1, 5.3 and 6.1 0 0 0 0 0 0 0 120 Off Off
23 Cinema Flat Mixing for Cinema without compensation for X-curve. 5.1 0 0 0 -3 -3 0 0 Off Off Off
24 Cine X-curve Mixing for Cinema in a small room – compensates for X-curve. 5.1 0 0 0 -3 -3 0 0 Off Yes Off
25 Cine X-curve2 Mixing for Cinema in a small room – compensates for modied X-curve. 5.1 0 0 0 -3 -3 0 0 Off Off Yes
26 Cinema X-50Hz Mixing for Cinema with small room X-curve compensation and bass management 0 0 0 -3 -3 0 0 50 Yes Off
27 Cinema X-80Hz Mixing for Cinema with small room X-curve compensation and bass management 0 0 0 -3 -3 0 0 80 Yes Off
28 Cine X-SC120Hz Mixing for Cinema with small room X-curve compensation and bass management 0 0 0 -3 -3 0 0 120 Yes Off
29 Cinema 80Hz Mixing for Cinema with bass management but without compensation for X-curve 0 0 0 -3 -3 0 0 80 Off Off
30 Cinema SC120 Mixing for Cinema with bass management but without compensation for X-curve 0 0 0 -3 -3 0 0 120 Off Off
31 OB Van SC120 OB vans and very small rooms where rear channels are close to sweet spot 0 0 0 -2 -2 0 0 120 Off Off
32 Neutral All parameters neutral – a good starting point 0 0 0 0 0 0 0 Off Off Off
* X-curve #1: ANSI / SMPTE222M – 1.5 dB roll off
per octave from 2 kHz. For more information, see
“X-Curves” on page 59.
** X-curve #2: ANSI / SMPTE222M Mod. – 3 dB roll off
per octave from 4 kHz. For more information, see
“X-Curves” on page 59.
Notes on LFE Gain
Please note that the LFE channel should be mixed with
+10 dB headroom. If you are not able to boost your
LFE monitor output, you should add +10 dB gain on
your AIR-Base subwoofer. Most format encoders/de-
coders take the LFE boost into account, meaning that
you should leave the AIR-Base LFE gain at 0 dB when
playing back DTS-encoded or DOLBY-encoded materi-
al on your AIR system.