Specifications

Before you begin
Dynaudio Professional AIR reference manual – 2014-08-28 5
Your new Dynaudio Professional AIR monitors
Congratulations on your purchase of the Dynaudio Pro-
fessional AIR active monitor system. With the right care
and attention, it will provide many years of excellent
and trouble-free audio reproduction.
Care
Components of the highest quality are used in your Dy-
naudio Professional AIR speakers. This assures years
of trouble-free operation. Following precautions should
still be made though.
►
Avoid running the system into severe clipping.
Although there is an advanced protection system,
you may be able to destroy your speakers by se-
verely overpowering them. The limiter works over
a certain range, but exceeding this level may send
a severely clipped signal to your drivers. When a
noticeable distortion occurs, please turn down the
level to your speakers.
►
Avoid hot-plugging the equipment connected to
the monitors. Always turn off the speaker and other
equipment when plugging or unplugging signals, or
switching equipment on or off.
►
Do not touch the drive units by hand.
Break-in time
The transducers of your Dynaudio Professional AIR
monitor will achieve better sound quality after breaking
in. Especially after the rst hours of use you may notice
a signicant advance in sound quality, and further sub-
tle improvements in subsequent hours of use.
Downloading test tone sets
To set up, congure and calibrate your Dynaudio Pro-
fessional monitors, we have created two sets of test
tones in WAV format – a stereo set and a multichannel
set. Throughout this manual, we will refer to these test
tones by their numbers.
You can download both sets of test tones from this
page:
dynaudioprofessional.com/pages/choosing-by-ear/
Service
There are no user serviceable parts inside the monitor.
Getting support
If you still have questions about the product after read-
ing this manual, please get in touch with Dynaudio Pro-
fessional Support:
dynaudioprofessional.com/support/
About this manual
Read this manual to learn how to set up and operate
your Dynaudio Professional AIR monitors.
To get the most from this manual, please read it from
start to nish, or you may miss important information.
This manual is only available as a PDF download from
the Dynaudio Professional website.
Of course, you can print this manual, but we encourage
you to use the PDF version, which has both internal
and external hyperlinks. For example, clicking the logo
in the upper left corner of each page will take you back
to the table of contents.
To download the most current version of this manual,
visit
dynaudioprofessional.com/support/