Specifications

AIR Control software
Dynaudio Professional AIR reference manual – 2014-08-28 74
Bass management page
Fig. 42: AIR Control software – Global – Bass
management page
Use the Bass management page in the Global section
of the AIR Control software to recall Bass management
presets and activate Advanced bass management fea-
tures.
To learn more about bass management, see “Congur-
ing bass management” on page 38 and “Bass man-
agement” on page 118.
Recalling Bass management presets
►
Click the Preset eld in the Bass Management
(Preset) section of the bass management page.
This will assign Bass management preset selection
to the large slider on the right of the window.
►
Drag the slider to select the desired bass manage-
ment preset.
For a description of the bass management presets,
their parameters and values, see “Bass management
modes and crossover frequencies” on page 38.
Advanced bass management
In bass management presets, the states of the three
lters (Satellite, Sub 4 and Sub 2) are predened. Using
Advanced bass management, you can activate these
lters individually for ne-grained control of demanding
speaker setups.
To activate Advanced bass management, click the On
button in the Advanced section of the Bass manage-
ment page. This will enable the remaining buttons in
this section.
►
Click the eld for the lter (Satellite HP, Sub 4th
order or Sub 2nd order) that you want to congure.
This will assign this lter to the large slider on the
right of the window.
►
Set the desired crossover frequency for this lter or
drag the slider down to set the lter to Off.
►
Click the LFE = Sub button to include the LFE
channel in bass management.