Specifications

AIR Control software
Dynaudio Professional AIR reference manual – 2014-08-28 71
Global and local
parameters
AIR Control software allows you to access and set two
kinds of parameters:
►
Global parameters that apply to all monitors in
an AIR system or dene general attributes of this
system, and
►
Local parameters for individual monitors.
When setting up your AIR system using AIR Control
software, start by setting the Global parameters and
then proceed to adapt the settings for individual moni-
tors. Descriptions of monitor-specic (local) parameters
start with “Selecting monitors for conguration” on page
78.
To access the Global parameters, click the Global but-
ton on top of the AIR Control software window.
Basic editing procedures
If a parameter or function in the AIR Control software
is represented by a round button, click this button to
select/deselect it or execute the respective function.
Fig. 36: Click a button to select/deselect or activate the
respective feature.
Fig. 37: Click a parameter eld to select it and then
edit its value using the large slider on the right side of
the window
If a parameter in the AIR Control software is represent-
ed by a rectangle with a parameter name, the current
parameter value and a miniature fader, you can either…
►
drag the miniature fader in the eld with your
mouse or
►
select the parameter eld by clicking it once and
then use the large fader on the right side of the
window to adjust it. You can also use the up and
down keys on your computer keyboard to adjust
a selected parameter. If your mouse has a scroll
wheel, you can also use this scroll wheel to
change the selected parameter.
AIR Control software
version information
Fig. 38: AIR Control software – version information
Click the Dynaudio Professional logo in the upper right
corner of the window to display a version information
panel. Click into the panel to dismiss it.