Specifications

Operating your AIR monitors
Dynaudio Professional AIR reference manual – 2014-08-28 35
The AIR display and keys
Use the four keys to the left and the right of the display
to navigate the menus of your AIR Master unit.
Fig. 19: The display and keys of an AIR master unit
ENTER key
The ENTER key has two main functions:
►
To enter the menus currently displayed.
►
To set the displayed parameter in Edit mode.
When a parameter can be edited using the arrow keys
to the right of the display, a “*” is set as the rst charac-
ter in front of the parameter.
EXIT key
The EXIT key is used to exit the current display and go
to previous menu level.
Arrow (up and down) keys
These keys are used for navigating and adjusting pa-
rameter values.
A parameter can be edited when it has been selected
using the ENTER key. Editable parameters are indicat-
ed by an asterisk (“*”).
Once you have set a parameter (e.g. a monitor task),
you do not need to conrm it. Changes are applied im-
mediately. However, if you later want to recall a given
conguration, you need to store it as a preset rst – see
“Storing presets” on page 48.
Overload Indication LED
When this LED ashes, the monitor’s built-in amp is
driven beyond maximum performance. A continuous
overload will activate the amp protection circuit and the
monitor will be shut down. The monitor can be reacti-
vated after a short period of cooling down.
This situation will NOT damage the monitor in any way.
Basic navigation/
operation
►
Use the two arrow keys to select a value for a pa-
rameter or a submenu. When a parameter namer
is preceded by an asterisk (“ * “), it can be altered
using the arrow keys.
►
Use the ENTER key to enter a menu or to conrm
an operation.
►
Use the EXIT key to move up one level in the
menu hierarchy or to discard (cancel) an operation.