Specifications

Rear panel controls and connections

Dynaudio Professional AIR reference manual – 2014-08-28 33

Slave/Sub – rear panel

Fig. 17: Slave/Sub – rear panel

1. RJ45 Link connections for downstream Slave units

2. Power input – 100 to 240 V

3. Power On/Off switch

Digital I/O card (optional)

Fig. 18: Digital I/O card (optional)

With this card installed in the option slot of the Master

unit, a 5.1 Digital/6 Master setup becomes an option.

Three AES/EBU connections (6 channels) can then be

fed to one Master monitor and distributed downstream.

For more information, see “Setups”.