Specifications

AIR setups
Dynaudio Professional AIR reference manual – 2014-08-28 14
5.1 setup – analog
L
L
LR
R
R
5.1 setup – analog
Master
Left
Sytem Ctrl.
Master
Left
Surround
Master
Center
L R C
LFE
LS RS
Slave
Right
Surround
Sub
Subwoofer
Slave
Right
Fig. 5: This illustration shows how to connect a 5.1 analog setup.
Understanding and using this setup
►
The left monitor is set as the System Controller by
setting the TC Link button on the rear panel to the
“out” position.
►
The left monitor receives both the left and right
input signals.
►
The right monitor receives audio via the TC-LINK
RJ-45 connection from the left monitor.
►
The left surround monitor (LS) receives both the
left and right surround channel signals.
►
The right surround monitor receives audio via the
TC-LINK RJ-45 connection from the left surround
monitor.
►
The center monitor (C) receives both center and
LFE channels.
►
The LFE monitor receives audio via the RJ-45
connection from the center monitor.
►
With no bass management, the subwoofer will play
only the LFE channel.
►
With bass management activated, low-frequency
information from the ve main channels is extract-
ed and sent to the subwoofer, where it is summed
with the LFE channel.
►
The AIR Remote or a computer running the AIR
Control software can be connected to any available
TC LINK Out connection.